-
The BU back-pull three-jaw chuck has the same size as the BUT back-pull two-jaw chuck. The BU back-pull chuck is suitable for processing workpieces with requirements for verticality and parallelism. This type of chuck has a wide clamping range. When loading different workpieces, you...
-
KEY ADVANTAGES Mandrels can be used on machine center Ms dock rotating for lathes without clamping cylinde Manual/hydraulic mandrel actuation Ideal for 5-sided machining Clamping range ∅8-200mm
-
KEY ADVANTAGES Ideal for automated clamping Angular contour requires less space Multiple clamping made possible in the smallest space Ideal for 5-sided machining Clamping is possible with workpiece end-stop or front end-stop Adaptation devices possible
-
KEY ADVANTAGES Ideal for automated clamping Angular contour requires less space Multiple clamping made possible in the smallest space Ideal for 5-sided machining Clamping is possible with workpiece end-stop or front end-stop Adaptation devices possible
-
KEY ADVANTAGES Ideal for automated clamping Angular contour requires less space Multiple clamping made possible in the smallest space Ideal for 5-sided machining Clamping is possible with workpiece end-stop or front end-stop Adaptation devices possible
-
KEY ADVANTAGES Mandrels can be used on machine center Ms dock rotating for lathes without clamping cylinde Manual/hydraulic mandrel actuation Ideal for 5-sided machining Clamping range ∅8-200mm
-
Pull the workpiece towards the baffle and clamp it at the same time, so it has the function of completely sticking the workpiece to the reference surface. It is particularly suitable for workpieces that require high verticality and concentricity processing accuracy of the reference...
-
Vendor: SOFTOOLStatic Hydraulic Mandrel Base BM420 BM420-HS-082 BM420-HS-109
● DeliverableInquiry2 variantsFeatures: Mandrel radial runout accuracy ≤ 0.01 mm. It can be optionally equipped with a leak detection function and an anti-error design. Suitable for three-axis, five-axis, and rotary table equipment, supporting multi-station machining. The internal piston design allows for both oil and air actuation,...
Siendo tendencia ahora
productos populares
Vendor:
BIGtools
Taladro de carburo sólido VBH, material de alta dureza 5XD, refrigerante interno D5.4~9.2
- From $31.70
- From $31.70
- Unit price
- / per
Vendor:
BIGtools
Broca de metal duro integral VBH, material de alta dureza 5XD, sin refrigerante D5.4~9.2
- From $20.02
- From $20.02
- Unit price
- / per
Vendor:
BIGtools
Taladro de carburo sólido VBH, material de alta dureza 5XD, refrigerante interno D3~5.3
- $31.70
- $31.70
- Unit price
- / per
Currency
Collections
Sidebar
Recently Viewed Products
- Choosing a selection results in a full page refresh.