-
Vendor: ChainHeadWayFixed Angle Vise - Precision Machining and Workpiece Clamping VAV-6
● DeliverableInquiry1 variants -
Vendor: ChainHeadWayK - Type Milling Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry3 variants
-
Vendor: ChainHeadWayFixed Angle Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variants
-
Vendor: ChainHeadWayLM-VE-U Tilting Vise - Precision Machining and Workpiece Clamping - LM-VE-160U
● DeliverableInquiry1 variants
-
Vendor: ChainHeadWayJLB Universal Hydraulic Tilting Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry2 variants
-
Vendor: ChainHeadWayLM-VE-H Hydraulic & Angle Lock Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry6 variantsFeature The body is made of ductile iron. Down thrust “semi-sphere segment” mechanism-eliminates lift and work tilt. Vise bed flame hardened to HRC 45° and keeps up wear and maintain abrasion resistance for long. Max. hydraulic clamping force 4000kg.
-
Vendor: ChainHeadWayAH Hydraulic Precision Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variants
-
Vendor: ChainHeadWayCHW-_V Hydraulic&angle Lock Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature Rigid material-vise body of ductile iron FCD60 JIS (equal to GGG60) with 60 kgs/mm2 or 80000 psi tensile strength. Slide surface of vise flame with harden treatment up to HRC45° and keeps up wear and maintain abrasion resistance for long.
-
Vendor: ChainHeadWayCHW-_PL Powerful-Type Precision Vise (Lengthen) High-Performance Extended-Length Clamping Tool for Precision Machining
● DeliverableInquiry2 variantsFeature Max. opening capacity 750mm.
-
Vendor: ChainHeadWayCHW-_P Powerful-Type Precision Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature The unit had prevent lifting structure. Mechanical power structure.
-
Vendor: ChainHeadWayLM-VE-_P Mechanical Power Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature Mechanical power structure. The total length is short, the big aperture, rotate the spanner to reduce effort.
-
Vendor: ChainHeadWayLM-VE-_S Super Open Type Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature This unit had prevent lifting structure, when clamping, downward power also gearing, so the workpiece and movable parts lift very small, the body and soild jaw is a combination structure, it does not tilt.
-
Vendor: ChainHeadWayLM-VE-_C Mechanical-Type Precision Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature This unit had prevent lifting structure, when clamping, downward power also gearing, so the workpiece and movable parts lift very small, the body and soild jaw is a combination structure, it does not tilt.
-
Vendor: ChainHeadWayLM-VE-_B Mulit-Folder Vise Fixed Block - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature High rigidity type. Holding work-piece firmly in single and multiple vises setup. Rigid and high tensile casting of ductile iron.
-
Vendor: ChainHeadWayCHW-_B Mulit-Folder Vise Fixed Block - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variantsFeature The unit had prevent lifting structure. Not turbo-charged organization, is suitable for clamping the soft workpiece.
-
Vendor: ChainHeadWayLM-VE-_J Pneumatic Mc Precision&angle Lock Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry7 variantsFeature Even the air source at low pressure 8kg/cm2 which can be achieved super high gripping force can be adjusted freely by pressure regulator. The shifting speed is only 1.5 sec. with safety range: 8mm, also equipped with safety line on hand wheel to easily identify...
-
Vendor: ChainHeadWayLM-FRA Flexible Parallel Vise Clamping Range (5 to 8 workpieces)
● DeliverableInquiry20 variants
-
Vendor: ChainHeadWayLM-FRA Flexible Parallel Vise Clamping Range (1 to 4 workpieces)
● DeliverableInquiry20 variants
-
Vendor: ChainHeadWayLM-BE50 Multi-Folder Vise Base - Adjustable Clamping System
● DeliverableInquiry15 variants
-
Vendor: ChainHeadWayLM-FRA-_A Multi-folder Vise Briquetting- Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variants
-
Vendor: ChainHeadWayLM-FRA-_B Multi-folder Vise Fixed Block - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variants
-
Vendor: ChainHeadWayLM-FRA Flexible Parallel Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry20 variants
-
Vendor: ChainHeadWayLM-VE-_D Double-Clamping Precision Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry2 variantsFeature Vise adopt downward locking structure to eliminate floating body functions. On the machining center with a variable of processing two parts. Spring of ductile iron FCD60.
-
Vendor: ChainHeadWayLM-VE-_SD Double-Clamping Precision Vise - Precision Machining and Workpiece Clamping LM-VE-100SD
● DeliverableInquiry1 variantsFeature With the fast double clamp mechanism, both workpieces can be clamped at the same time, also be clamped unilaterally. Vise hard jaw material is full steel and heat treatment at HRC55˚or more. Owing to its good design to use both sides of jaw since it...
-
Vendor: ChainHeadWayLM-VE-_SC Self-Centring Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variants
-
Vendor: ChainHeadWayLM-VE-90SC Self Centring Vise - Precision Machining and Workpiece Clamping LM-VE-90SC
● DeliverableInquiry1 variants
-
Vendor: ChainHeadWayLM-VE-_SC Self Centring Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry3 variants
-
Vendor: ChainHeadWayCC-QCP96-192 Quick-Change Base Plate - Precision CNC Machining and Rapid Fixture Positioning
● DeliverableInquiry1 variantsFeature Need to be used with LM-VE-127SC、LM-VE-153SCLM、LM-VE-210SC Precision of its center repetition position is ± 0.01mm. Material : Alloy steel
-
Vendor: ChainHeadWayLM-VE-_DCS Mechanical-Type Double Self-Centering Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry4 variants
-
Vendor: ChainHeadWayLM-OKV-Mini Vise - Precision Machining and Workpiece Clamping
● DeliverableInquiry8 variants
Collections
Nuestros mejores vendedores
Vendor:
ChainHeadWay
LM-VE-H Hydraulic & Angle Lock Vise - Precision Machining and Workpiece Clamping
Feature
The body is made of ductile iron.
Down thrust “semi-sphere segment” mechanism-eliminates lift and work tilt.
Vise bed flame hardened to HRC 45° and keeps up wear and maintain abrasion resistance for long.
Max. hydraulic clamping force 4000kg.
Inquiry
Feature
Rigid material-vise body of ductile iron FCD60 JIS (equal to GGG60) with 60 kgs/mm2 or 80000 psi tensile strength.
Slide surface of vise flame with harden treatment up to HRC45° and keeps up wear and maintain abrasion resistance for long.
Inquiry
Vendor:
ChainHeadWay
CHW-_PL Powerful-Type Precision Vise (Lengthen) High-Performance Extended-Length Clamping Tool for Precision Machining
Feature
Max. opening capacity 750mm.
Inquiry
Vendor:
ChainHeadWay
CHW-_P Powerful-Type Precision Vise - Precision Machining and Workpiece Clamping
Feature
The unit had prevent lifting structure.
Mechanical power structure.
Inquiry
Feature
Mechanical power structure.
The total length is short, the big aperture, rotate the spanner to reduce effort.
Inquiry
Feature
This unit had prevent lifting structure, when clamping, downward power also gearing, so the workpiece and movable parts lift very small, the body and soild jaw is a combination structure, it does not tilt.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_C Mechanical-Type Precision Vise - Precision Machining and Workpiece Clamping
Feature
This unit had prevent lifting structure, when clamping, downward power also gearing, so the workpiece and movable parts lift very small, the body and soild jaw is a combination structure, it does not tilt.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_B Mulit-Folder Vise Fixed Block - Precision Machining and Workpiece Clamping
Feature
High rigidity type.
Holding work-piece firmly in single and multiple vises setup.
Rigid and high tensile casting of ductile iron.
Inquiry
Vendor:
ChainHeadWay
CHW-_B Mulit-Folder Vise Fixed Block - Precision Machining and Workpiece Clamping
Feature
The unit had prevent lifting structure.
Not turbo-charged organization, is suitable for clamping the soft workpiece.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_J Pneumatic Mc Precision&angle Lock Vise - Precision Machining and Workpiece Clamping
Feature Even the air source at low pressure 8kg/cm2 which can be achieved super high gripping force can be adjusted freely by pressure regulator. The shifting speed is only 1.5 sec. with safety range: 8mm, also equipped with safety line on hand wheel to easily identify...
Inquiry
- Choosing a selection results in a full page refresh.