-
Vendor: SOFTOOLGeneral Purpose 45° Adaptor HSK-T50-ASHR45-095-20
● Deliverable- From $356.44
- From $356.44
- Unit price
- per
6 variantsFeatures： Can be used with traditional square tool holders. Reduce the tool cost. No need downtime to adjust the tool. Can be applied from multiple angles. -
Vendor: SOFTOOLGeneral Purpose 0° tri-sides Adaptor HSK-T50-ASHR3-36133-20
● Deliverable
- From $606.26
- From $606.26
- Unit price
- per
6 variantsFeatures： Can be used with traditional square tool holders. Reduce the tool cost. No need downtime to adjust the tool. Can be applied from multiple angles. -
Vendor: SOFTOOLHSK-T-SR Face Slotting Adapter-R/L HSK-T32-SR16-043R
● Deliverable
- From $315.99
- From $315.99
- Unit price
- per
40 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR Face Slotting Adapter HSK-T32-SR16-055
● Deliverable
- From $315.99
- From $315.99
- Unit price
- per
27 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR70 Adapter Handle-R/LX HSK-T50-SR70-RX-045-060M
● Deliverable
- From $530.11
- From $530.11
- Unit price
- per
10 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR70 Adapter Handle-R/LF HSK-T50-SR70-RF-053
● Deliverable
- From $378.79
- From $378.79
- Unit price
- per
8 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR70 Adapter Handle-R/LG HSK-T50-SR70-RG-060
● Deliverable
- From $378.79
- From $378.79
- Unit price
- per
8 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR Adapter Handle-R/LX-L1 HSK-T50-SR32-RX-045-L1
● Deliverable
- From $441.49
- From $441.49
- Unit price
- per
4 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR Adapter Handle-R/LX HSK-T50-SR25-RX-045
● Deliverable
- From $315.59
- From $315.59
- Unit price
- per
12 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR Adapter Handle-R/LG HSK-T50-SR32-52-RG
● Deliverable
- From $315.59
- From $315.59
- Unit price
- per
14 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR Face Slotting Adapter-F HSK-T40-SR32-70-RF
● Deliverable
- From $287.51
- From $287.51
- Unit price
- per
12 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOLHSK-T-SR Adapter Handle-F HSK-T32-SR25-43-RF
● Deliverable
- From $284.84
- From $284.84
- Unit price
- per
24 variantsFeatures： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible... -
Vendor: SOFTOOL138 Standard Pull Nail BZ300-WA-M16-138 BZ300-WB-M16-138
● DeliverableInquiry3 variants
-
Vendor: SOFTOOL138 Standard Pull Nail BZ300-WA-M12-138 BZ300-WB-M12-138
● DeliverableInquiry3 variants
-
Vendor: SOFTOOL90 Standard Pull Nail BZ300-WA-M8-090 BZ300-WB-M8-090
● DeliverableInquiry3 variants
-
Vendor: BIGtoolsGER Tapping Collet (Metric/ISO, Japanese standard/JIS, German standard/DIN)
● DeliverableInquiry43 variants -
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry14 variantsFeatures: Spindle conicity standard: JDIN69871A or GB10944. Aperture tolerance: H5. Used for remachining with rigidly grip. Face mill chuck used to be the holder of cutting tools. When attaching, cutting tools, with strong side aligned lock between the plane of the part and notch...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry8 variantsFeatures: Spindle conicity standard: JDIN69871A or GB10944. Aperture tolerance: H5. Used for remachining with rigidly grip. Face mill chuck used to be the holder of cutting tools. When attaching, cutting tools, with strong side aligned lock between the plane of the part and notch...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry12 variantsFeatures: Spindle conicity standard: DIN69871A or GB10944. Used in Morse conicity tools, drill chuck, reamer and so on. Dimensions. The pull stud must purchase alone.
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry17 variantsFeatures: Spindle conicity standard: DIN69871A or GB10944. With water through design that reduces vibration and steady for cutting. Connecting part(d) designed for metric size. Can be made upon requested dimensions. The pull stud must purchase alone.
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry12 variantsFeatures: Spindle conicity standard: DIN69871A or GB10944. With water through design that reduces vibration and steady for cutting. Connecting part(d) designed for metric size. Can be made upon requested dimensions. The pull stud must purchase alone.
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry25 variantsFeatures: Spindle conicity standard: DIN69871A or GB10944. ER collet chuck set with ER collet with flexibility used for gripping cutting tool, drill bit, draw bolt and so on. When using, nut should be clamped tensed firstly with cutting tools then locked into the main...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry20 variantsFeatures: Spindle conicity standard: DIN69871A or GB10944. ER collet chuck set with ER collet with flexibility used for gripping cutting tool, drill bit, draw bolt and so on. When using, nut should be clamped tensed firstly with cutting tools then locked into the main...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry7 variantsFeatures: High speed, high accuracy, high durability C-STRAIGHT TOOL SERIES Material: 20CrMnTi/15CrMn. Hardness: HRC58-60, Carbon depth > 0.8mm. Tolerance class: ≤ AT3. Inner hole of the shank divide into 6 troughs to prevent the insert remove, increase the grasp force. Ball bearing cage is made...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry47 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry24 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry10 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry19 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry28 variantsFeatures: Spindle conicity standard: JIS MAS 403 BT. Aperture tolerance: H5. Used for remachining with rigidly grip. Face mill chuck used to be the holder of cutting tools. When attaching, cutting tools, with strong side aligned lock between the plane of the part and notch...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry16 variantsFeatures: Spindle conicity standard: JIS MAS 403 BT. Aperture tolerance: H5. Used for remachining with rigidly grip. Face mill chuck used to be the holder of cutting tools. When attaching, cutting tools, with strong side aligned lock between the plane of the part and notch...
Collections
Nuestros mejores vendedores
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $356.44
- From $356.44
- Unit price
- per
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $606.26
- From $606.26
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $530.11
- From $530.11
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $441.49
- From $441.49
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $287.51
- From $287.51
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $284.84
- From $284.84
- Unit price
- per
Features: Spindle conicity standard: JDIN69871A or GB10944. Aperture tolerance: H5. Used for remachining with rigidly grip. Face mill chuck used to be the holder of cutting tools. When attaching, cutting tools, with strong side aligned lock between the plane of the part and notch...
Inquiry
Features: Spindle conicity standard: JDIN69871A or GB10944. Aperture tolerance: H5. Used for remachining with rigidly grip. Face mill chuck used to be the holder of cutting tools. When attaching, cutting tools, with strong side aligned lock between the plane of the part and notch...
Inquiry
Features:
Spindle conicity standard: DIN69871A or GB10944.
Used in Morse conicity tools, drill chuck, reamer and so on.
Dimensions.
The pull stud must purchase alone.
Inquiry
Features:
Spindle conicity standard: DIN69871A or GB10944.
With water through design that reduces vibration and steady for cutting.
Connecting part(d) designed for metric size.
Can be made upon requested dimensions.
The pull stud must purchase alone.
Inquiry
- Choosing a selection results in a full page refresh.