-
Vendor: YGFlat Shank E9992 Series, Premium HSS-PM, 2 Flute Regular Length Ball Nose TANK-POWER End Mills 1/8～1
● DeliverableInquiry20 variants▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design... -
Vendor: YGFlat Shank E9988 Series, Premium HSS-PM, 3&4 Flute 60° Helix Regular Length TANK-POWER End Mills 1/4～1
● DeliverableInquiry20 variants▶ Faster feed & speed than normal HSS can be applied to hardened steels up to HRc45. Accordingly, HSS-PM made by powder metallurgy makes much higher productivity possible.
-
Vendor: YGFlat Shank E9986 Series, Premium HSS-PM, 4 Flute Regular Length Double TANK-POWER End Mills 1/8～1
● DeliverableInquiry20 variants▶ Series E9986,EP986 four flute end mills are the double end version of E9985,EP985 single-end tools. Faster feed & speed than normal HSS can be applied to hardened steels up to HRc45. Accordingly, HSS-PM made by powder metallurgy makes much higher productivity possible.
-
Vendor: YGFlat Shank E9985 Series, Premium HSS-PM, 4 Flute Regular Length TANK-POWER End Mills 1/8～1
● DeliverableInquiry20 variants▶ Faster feed & speed than normal HSS can be applied to hardened steels up to HRc45. Accordingly, HSS-PM made by powder metallurgy makes much higher productivity possible.
-
Vendor: YGFlat Shank E9984 Series, Premium HSS-PM, 2 Flute Regular Length Double TANK-POWER End Mills 1/8～1
● DeliverableInquiry20 variants▶ Series E9984, E9984 two flute, end mills are the double end version of E9983, E9983 single-end tools.Faster feed & speed than normal HSS can be applied to hardened steels up to HRc45. Accordingly, HSS-PM made by powder metallurgy makes much higher productivity possible.
-
Vendor: YGFlat Shank E9983 Series, Premium HSS-PM, 2 Flute Regular Length TANK-POWER End Mills 1/8～1
● DeliverableInquiry20 variants▶ Faster feed & speed than normal HSS can be applied to hardened steels up to HRc45. Accordingly, HSS-PM made by powder metallurgy makes much higher productivity possible.
-
Vendor: YGFlat Shank GYG70 Series, PM60, Multi Flute Roughing- Coarse (Center Cut) ONLY ONE End Mills 1/4～1
● DeliverableInquiry8 variants
-
Vendor: YGFlat Shank GYG68 Series, PM60, Multi Flute Roughing- Fine (Center Cut) ONLY ONE End Mills 1/4～1
● DeliverableInquiry15 variants
-
Vendor: YGFlat Shank GYG69 Series, PM60, Multi Flute Multiple Helix Corner Radius Roughing - Fine (Center Cut) ONLY ONE End Mills 1/4～1
● DeliverableInquiry7 variants
-
Vendor: YGFlat Shank GYG66 Series, PM60, 4 Flute Multiple Helix (Center Cut) ONLY ONE End Mills 1/8～1
● DeliverableInquiry9 variants
-
Vendor: YGFlat Shank GYG65 Series, PM60, 4 Flute (Center Cut) ONLY ONE End Mills 1/8～1
● DeliverableInquiry10 variants
-
Vendor: YGFlat Shank GYG67 Series, PM60, 4 Flute Ball Nose ONLY ONE End Mills 1/8～1
● DeliverableInquiry9 variants
-
Vendor: YGFlat Shank GYG64 Series, PM60, 2 Flute (Center Cut) ONLY ONE End Mills 1/8～1
● DeliverableInquiry9 variants
-
Vendor: YGPlain Shank EH882 Series, Carbide, 3 Flute 35° Helix Corner Radius - TiAlN ‘F’ Coated CARBIDE End Mills 3.0～20
● DeliverableInquiry9 variants
-
Vendor: YGPlain Shank EH540 Series, Carbide, 4 Flute Long Length - TiAlN ‘F’ Coated CARBIDE End Mills 3.5～20
● DeliverableInquiry22 variants
-
Vendor: YGPlain Shank EH527 Series, Carbide, 2 Flute Long Length - TiAlN ‘F’ Coated CARBIDE End Mills 3.5～20
● DeliverableInquiry22 variants
-
Vendor: YGPlain Shank E5078 Series, Carbide, 3 Flute Taper Ball Nose CARBIDE End Mills 5/32～1/4
● DeliverableInquiry100 variantsProduct Information ▶ Designed for milling die cavity. ▶ Many different center line angles are available on your job requirement.
-
Vendor: YGPlain Shank E5077 Series, Carbide, 3 Flute Taper CARBIDE End Mills 3/32～1/4
● DeliverableInquiry100 variantsProduct Information ▶ Designed for milling die cavity. ▶ Many different center line angles are available on your job requirement.
-
Vendor: YGFlat Shank E5056 & E5057 Series, Carbide, 5 Flute 45° Helix Stub & Regular Length Fine Pitch Roughing Corner Radius CARBIDE End Mills 3/8～1
● DeliverableInquiry50 variantsProduct Information ▶ 5 flute design gives minimum harmonic vibration. ▶ Stub tools for minimum deflection and maximum rigidity. ▶ Ideal for profile milling. ▶ Not recommended for slotting.
-
Vendor: YGPlain Shank E5058 Series, Carbide, 6 Flute 40° Helix Regular Length CARBIDE End Mills 3/16～3/4
● DeliverableInquiry40 variantsProduct Information ▶ Designed to machine stainless steels, inconels and other alloys. ▶ The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection. ▶ 5 Flute and 45° medium helix allow harmonic balance and smooth cutting.
-
Vendor: YGPlain Shank E5073 Series, Carbide, 5 Flute 45° Helix Extra Long Length CARBIDE End Mills 5/16～1
● DeliverableInquiry30 variantsProduct Information ▶ Designed to machine stainless steels, inconels and other alloys. ▶ The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection. ▶ 5 Flute and 45° medium helix allow harmonic balance and smooth cutting.
-
Vendor: YGPlain Shank E5068 Series, Carbide, 5 Flute 45° Helix Medium & Long Length CARBIDE End Mills 1/4～1
● DeliverableInquiry50 variantsProduct Information ▶ Designed to machine stainless steels, inconels and other alloys. ▶ The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection. ▶ 5 Flute and 45° medium helix allow harmonic balance and smooth cutting.
-
Vendor: YGPlain Shank E5067 Series, Carbide, 5 Flute 45° Helix Regular Length CARBIDE End Mills 1/8～1
● DeliverableInquiry65 variantsProduct Information ▶ Designed to machine stainless steels, inconels and other alloys. ▶ The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection. ▶ 5 Flute and 45° medium helix allow harmonic balance and smooth cutting.
-
Vendor: YGPlain Shank E5066 Series, Carbide, 5 Flute 45° Helix Stub Length CARBIDE End Mills 1/8～1
● DeliverableInquiry60 variantsProduct Information ▶ Designed to machine stainless steels, inconels and other alloys. ▶ The new design of stub length allows cutting at maximum speeds and feeds with minimum deflection. ▶ 5 Flute and 45° medium helix allow harmonic balance and smooth cutting.
-
Vendor: YGPlain & Flat Shank E5246 Series, Carbide, 3 Flute 60° Helix Regular Length CARBIDE End Mills 1/8～1
● DeliverableInquiry50 variantsProduct Information ▶ Excellent shearing and chip ejection due to 60° Helix. ▶ 20%〜 30% increase in chip load recommended over 30° helix tools.
-
Vendor: YGPlain Shank E5059 Series, Carbide, 3 Flute 50° Helix Stub & Regular & Long Length CARBIDE End Mills 1/4～3/4
● DeliverableInquiry65 variantsProduct Information ▶ Designed to machine stainless steel, inconel, titanium and other hard to machine materials. ▶ It’s 3 flute design gives high stability and allows good chip removal in plunging & slotting operations. ▶ The high rake angle and 50° helix allows an...
-
Vendor: YGPlain & Flat Shank E5243 Series, Carbide, 3 Flute 45° Helix Regular Length CARBIDE End Mills 1/8～1
● DeliverableInquiry50 variantsProduct Information ▶ Designed to machine stainless steel, inconel, titanium and other hard to machine materials. ▶ It’s 3 flute design gives high stability and allows good chip removal in plunging & slotting operations. ▶ The normal rake angle and 45° medium helix allows...
-
Vendor: YGPlain Shank E5069 Series, Carbide, 5 Flute 45° Helix Regular Length Corner Radius CARBIDE End Mills 1/4～1
● DeliverableInquiry22 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5216 Series, Carbide, 4 Flute Regular Length Corner Radius CARBIDE End Mills 1/8～1/2
● DeliverableInquiry86 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5251 & E5252 Series, Carbide, 2&4 Flute Stub Length Double Ball Nose CARBIDE End Mills 7/32～1/2
● DeliverableInquiry60 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Related categories
Deburring Tools
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Internal Coolant
Micro Deep End Mills
PCD End Mills
Roughing End Mills
Solid End Mills for Dental