-
Vendor: TaeguTecTFMBL-R-13 High feed face mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm
● DeliverableInquiry30 variantsProduct List Versatile High Feed Mill with Strong 6 Cutting Edge Insert » Double-sided 6 corner insert» Optimized insert design for high feed machining» Low cutting forces and excellent rigidity» Excellent chip evacuation» First choice for high productivity in max 2mm high depth of... -
Vendor: TaeguTecTFMBLV-R-06 Face mills with 4 cutting edges of V-shaped double-sided BLMV inserts for high feed milling
● DeliverableInquiry13 variantsProduct List Designation CICT DCX DC DCONMS DHUB OAL APMX Arbor Weight/kg Mtg. Ref MIID TFMBLV 432-16R-06 4 32.00 24.00 16.00 30.00 40.00 1.00 A 0.11 SH M8x25 BLMV 0603R-M TFMBLV 532-16R-06 5 32.00 24.00 16.00 30.00 40.00 1.00 A 0.11 SH M8x25 BLMV...
-
Vendor: TaeguTecTFMBN-R-09CH High Feed mills with Dimple negative Ceramic inserts of four cutting edges for high speed machining of super alloys
● DeliverableInquiry3 variantsProduct List High-Speed & High Feed Milling Solution for Super Alloys » Ceramic inserts for super alloy high speed milling» Optimized edge for high feed machining» Higher productivity thanks to high speed & high feed machining» Covers a wide variety of applications Designation DCX...
-
Vendor: TaeguTecTFMBN-R-12 High Feed mills with negative Ceramic inserts of 6 cutting edges & air holes for high speed machining of super alloys in wedge clamping type
● DeliverableInquiry5 variantsProduct List High-Speed & High Feed Milling Solution for Super Alloys » Ceramic inserts for super alloy high speed milling» Optimized edge for high feed machining» Higher productivity thanks to high speed & high feed machining» Covers a wide variety of applications Designation DCX...
-
Vendor: TaeguTecTFMPT-R-05 High Feed mills with PTKU 05 inserts of economical 10 cutting edges in maximum depth of cut ap 1.5 mm
● DeliverableInquiry5 variantsProduct List High Feed and 65° Face Mill withDouble-sided Pentagonal Insert » High feed milling and 65° face milling with same insert» Economical double-sided 10 cutting edge insert» High positive rake angle» Strong insert cutting edge» Good chip evacuation Designation DCX CICT DC DCONMS...
-
Vendor: TaeguTecTFMPT-R-10 High Feed mills with PTKU 10 inserts of economical 10 cutting edges in maximum depth of cut ap 3.0 mm
● DeliverableInquiry12 variantsProduct List High Feed and 65° Face Mill withDouble-sided Pentagonal Insert » High feed milling and 65° face milling with same insert» Economical double-sided 10 cutting edge insert» High positive rake angle» Strong insert cutting edge» Good chip evacuation Designation DCX CICT DC DCONMS...
-
Vendor: TaeguTecTFMRN-R-1207 Face mills with negative round RNGN 12 ceramic inserts & wedge clamp with air hole for high speed milling of super alloys
● DeliverableInquiry8 variantsProduct List High-speed milling of super alloys » Round type SiAlON ceramic grade inserts» High-speed milling on super alloys» Special wedge clamp with air supply nozzle» Strong clamping and stable machining» Higher productivity with more teeth Designation DCX DC CICT DCONMS DHUB OAL APMX...
-
Vendor: TaeguTecTFMRNS-R-10/12/16 Face mills with double-sided round inserts for general applications and various industries
● DeliverableInquiry28 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation DCX DC...
-
Vendor: TaeguTecTFMRP-R-12 Face mills with positive round RPGN 12 ceramic inserts & wedge clamp with air hole for high speed milling of super alloys with low cutting force
● DeliverableInquiry2 variantsProduct List High-speed milling of super alloys » Round type SiAlON ceramic grade inserts» High-speed milling on super alloys» Special wedge clamp with air supply nozzle» Strong clamping and stable machining» Higher productivity with more teeth Designation DC DCX CICT DCONMS DHUB OAL APMX...
-
Vendor: TaeguTecTFMRY H-R-16/20 Carbide shim type face mills with strong positive round inserts of RYM(H)X for general profiling & general machining
● DeliverableInquiry10 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: TaeguTecTFMRY-R-08/10/12/16/20 Face mills with strong positive round inserts of RYM(H)X for general profiling & general machining
● DeliverableInquiry46 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: TaeguTecTFMSB-R-06 High feed face mills with positive SBMT 06 inserts of four cutting edges in max. ap 1.0 mm
● DeliverableInquiry4 variantsProduct List High feed milling with low cutting forces » Single-sided 4 corner insert» Optimized insert design for high feed machining» Smooth machining and excellent chip evacuation» Thick and high rigid insert» Suitable for difficult-to-cut materials Designation DCX CICT DC DCONMS DHUB OAL APMX...
-
Vendor: TaeguTecTFMSB-R-09 High feed face mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm
● DeliverableInquiry16 variantsProduct List High feed milling with low cutting forces » Single-sided 4 corner insert» Optimized insert design for high feed machining» Smooth machining and excellent chip evacuation» Thick and high rigid insert» Suitable for difficult-to-cut materials Designation DCX CICT DC DCONMS DHUB OAL APMX...
-
Vendor: TaeguTecTFMSB-R-13 High feed face mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm
● DeliverableInquiry20 variantsProduct List High feed milling with low cutting forces » Single-sided 4 corner insert» Optimized insert design for high feed machining» Smooth machining and excellent chip evacuation» Thick and high rigid insert» Suitable for difficult-to-cut materials Designation DCX CICT DC DCONMS DHUB OAL APMX...
-
-
-
-
-
-
-
Vendor: BIG DAISHOWAThe BIG Original Slit Mechanism Supports High Power And High-precision Endmilling From Heavy Cuts To Fine Cuts
● DeliverableInquiry32 variants -
Vendor: BIG DAISHOWAThe BIG Original Slit Mechanism Supports High Power And High-precision Endmilling From Heavy Cuts To Fine Cuts
● DeliverableInquiry24 variants
-
Vendor: BIG DAISHOWAThe Cutting Edge Angle Can Be Freely Adjusted, Making It Ideal For Machining The Corners Of Molds In Deep AreasAngle Head AGU Series
● DeliverableInquiry2 variants
-
Vendor: BIG DAISHOWAThe Cutting Edge Angle Can Be Freely Adjusted, Making It Ideal For Machining The Corners Of Molds In Deep Areas Angle Head AGU Series
● DeliverableInquiry2 variants
-
Vendor: BIG DAISHOWAThe Dual Contact BIG-PLUS System Has Been Standardized
● DeliverableInquiry19 variants
-
Vendor: BIG DAISHOWAThe Ultimate Precision Hydraulic Chuc Amazing Runout Accuracy Within 1μm At 4D Hydraulic Chuck Up
● DeliverableInquiry12 variants
-
Vendor: TaeguTecTHFN Nano High Feed end mills with High Feed HFN inserts & internal coolant for miniature components
● DeliverableInquiry4 variantsProduct List Nano Indexable Insert for High Feed Milling » High feed geometry» Nano size insert» Very high ramping down angle» Direct coolant supply to the insert's cutting edge» Simple and strong screw clamping Designation DC DCX CICT DCONMS BD OAL LH LU APMX...
-
Vendor: TaeguTecTHFN-CT Nano High Feed end mills with High Feed HFN inserts & carbide shank for better rigidity & miniature components
● DeliverableInquiry4 variantsProduct List Nano Indexable Insert for High Feed Milling » High feed geometry» Nano size insert» Very high ramping down angle» Direct coolant supply to the insert's cutting edge» Simple and strong screw clamping Designation DC DCX CICT DCONMS BD OAL LH APMX Coolant...
-
Vendor: TaeguTecTHFN-S High feed modular end mills with MAXI-RUSH adaption & Small high feed HFN inserts for miniature components
● DeliverableInquiry2 variantsProduct List Nano Indexable Insert for High Feed Milling » High feed geometry» Nano size insert» Very high ramping down angle» Direct coolant supply to the insert's cutting edge» Simple and strong screw clamping Designation DC DCX CICT DCONMS LF LU OAL THSZMS APMX...
-
Vendor: ZCC.CTInsertos de roscado (tipo delgado) RT16.01W/16.01N-0.50/0.75/1.00/1.25/1.50/1.75/2.00/2.50/3.00GMB
● Deliverable- From $4.86
- From $4.86
- Unit price
- per
43 variants
Related categories
3 Flute Carbide Drills
BIG DAISHOWA
Carbide Drill Bits
Coolant
Damping Tools
Deburring Tools
Digimatic
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
External Coolant
Extrnal
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Insert
Internal
Internal Coolant
ISCAR
Large Diameter Boring
Mega Chuck
Micro Deep End Mills
Modular Drill
PB Swiss Tools
PCD Drill
PCD End Mills
Rough Boring
Roughing End Mills
Ruby
Shallow Hole Drill
Small Parts Machining
Solid End Mills for Dental
Swiss Type Lathe
TaeguTec
Tungsten carbide
Without Coolant
ZCCT