-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry35 variantsFeatures: Nut for pre-set dynamic balance nut. The whole through hole is favorable for water and shock resistance. When installed, the collet must be loaded into the nut, and then into the tool, and then into the body and lock. The tool into the... -
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry18 variantsFeatures: Internal hole tolerance: H5
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry6 variantsFeatures: Slitting. In that case end mill shank or collet have oil or chips, divide the slitting into six in order to prevent slipping and to grip exactly. Needle bearing. It adopts two line arrangement in order to minimize rolling friction and to slip...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry30 variantsFeatures: Nut for pre-set dynamic balance nut. The whole through hole is favorable for water and shock resistance. When installed, the collet must be loaded into the nut, and then into the tool, and then into the body and lock. The tool into the...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry15 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry11 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry22 variantsFeatures: Internal hole tolerance: H5
-
Vendor: SOFTOOLHydraulic Actuated Receiver PSC50 PSC40 PSC63 PSC80 PSC80X
● Deliverable
- From $1,999.00
- From $1,999.00
- Unit price
- per
5 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely. -
Vendor: SOFTOOLHydraulic Actuated Receiver-Low-Pressure Cooling PSC63 PSC80
● DeliverableInquiry2 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely.
-
KEY ADVANTAGES Mandrels can be used on machine center Ms dock rotating for lathes without clamping cylinde Manual/hydraulic mandrel actuation Ideal for 5-sided machining Clamping range ∅8-200mm
-
Vendor: SOFTOOLInternal Turning Tool Body HSK-T DCLNR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
6 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T DDUNR/L-Kr 93°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
10 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T DWLNR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
4 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T PCLNR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
26 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T PSKNR/L-Kr 75°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
5 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T SCLCR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
42 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T SDUCR/L-Kr 93°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
40 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T STFCR/L-Kr 91°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
8 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T SVQBR/L-Kr 107.5°
● Deliverable
- From $303.53
- From $303.53
- Unit price
- per
18 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLISL 12-IC lnternal cooling ISL01200030MIC-AA/AAA
● Deliverable
- From $52.00
- From $52.00
- Unit price
- per
12 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 12-PC End-face cooling ISL01200030MPC-AA/AAA ISL01200080MPC-AA/AAA
● Deliverable
- From $76.00
- From $76.00
- Unit price
- per
10 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 20-IC lnternal cooling ISL02000030MIC-AA/AAA ISL02000160MIC-AA/AAA
● Deliverable
- From $52.00
- From $52.00
- Unit price
- per
28 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 20-PC End-face cooling ISL02000030MPC-AA/AAA ISL02000160MPC-AA/AAA
● Deliverable
- From $76.00
- From $76.00
- Unit price
- per
28 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 25-IC lnternal cooling ISL02500060MIC-AA/AAA ISL02500200MIC-AA/AAA
● Deliverable
- From $60.00
- From $60.00
- Unit price
- per
16 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 32-IC lnternal cooling ISL03200060MIC-AA/AAA ISL03200250MIC-AA/AAA
● Deliverable
- From $60.00
- From $60.00
- Unit price
- per
18 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 32-PC End-face cooling ISL03200060MPC-AA/AAA ISL03200250MPC-AA/AAA
● Deliverable
- From $76.00
- From $76.00
- Unit price
- per
18 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
-
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry12 variantsFeatures: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry12 variants
Siendo tendencia ahora
productos populares
Vendor:
BIGtools
Taladro de carburo sólido VBH, material de alta dureza 5XD, refrigerante interno D5.4~9.2
- From $31.70
- From $31.70
- Unit price
- / per
Vendor:
BIGtools
Broca de metal duro integral VBH, material de alta dureza 5XD, sin refrigerante D5.4~9.2
- From $20.02
- From $20.02
- Unit price
- / per
Vendor:
BIGtools
Taladro de carburo sólido VBH, material de alta dureza 5XD, refrigerante interno D3~5.3
- $31.70
- $31.70
- Unit price
- / per
Currency
Collections
Sidebar
productos vistos recientemente
- Choosing a selection results in a full page refresh.