-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T PDJNR/L-Kr 93°
● Deliverable- From $233.23
- From $233.23
- Unit price
- per
18 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRYHX 08/10/12-MR Positive ground strong round inserts with flat top geometry for heavy roughing applications
● DeliverableInquiry5 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with... -
Vendor: SOFTOOLExternal Turning Tool Body HSK-T PCLNR/L-Kr 95°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
26 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRYHX 08/10/12-MLL Positive ground strong round inserts with sharp cutting edges for exotic materials machining in strong and stable machines (More sharp than ML)
● DeliverableInquiry3 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DRSNR/L
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
6 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRYHX 08/10/12-L Positive ground strong round inserts with very sharp cutting edges for exotic materials machining
● DeliverableInquiry2 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: TaeguTecRYHX 08/10/12/16-ML Positive ground strong round inserts with sharp cutting edges for exotic materials machining
● DeliverableInquiry1 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: TaeguTecRYMX 08/10/12/16/20-MR Positive strong round inserts with flat top geometry for heavy roughing applications
● DeliverableInquiry18 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: TaeguTecRYMX 08/10/12-MLL Positive strong round inserts with sharp geometry than ML for stainless steels and difficult-to-cut materials
● DeliverableInquiry3 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: TaeguTecRYMX 08/10/12/16-MM Positive strong round inserts with sharp but strong cutting edges for stainless steels and difficult-to-cut materials
● DeliverableInquiry18 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DWLNR/L-Kr 95°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
16 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRYMX 08/10/12/16/20-ML Positive strong round inserts with sharp cutting edges for stainless steels and difficult-to-cut materials
● DeliverableInquiry30 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DVJNR/L-Kr 93° DVVNN-Kr 72.5°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
12 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRYMX 08/10/12/16/20-M Positive strong round inserts with medium geometry for general applications
● DeliverableInquiry41 variantsProduct List Single-sided Round Insert for Profiling and Various Applications » Various cutting edge geometries suitable for all applications» Wide range of applications from general to aerospace industry milling» Anti-rotational design enables secure clamping and easy indexing» Economical machining due to 6~8 indexing with...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DCMNN-Kr 50°
● Deliverable
- From $298.03
- From $298.03
- Unit price
- per
5 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRNMU 10/12/16-ML Double-sided economical round inserts for general milling applications with max. 8 index per side (total 16 corners) when the depth of cut is limited.
● DeliverableInquiry16 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation RE IC...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DCRNR/L-Kr 75°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
16 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRNMU 10/12/16 S-M Double-sided economical round inserts with serrated cutting edges for smooth machining & 4 index per side -total maximum 8 corners
● DeliverableInquiry13 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation RE IC...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DTJNR/L-Kr 93°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
14 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRPGN 1204 FL Flat type positive round ceramic inserts for high speed milling of super alloys with low cutting force
● DeliverableInquiry6 variantsProduct List High-speed milling of super alloys » Round type SiAlON ceramic grade inserts» High-speed milling on super alloys» Special wedge clamp with air supply nozzle» Strong clamping and stable machining» Higher productivity with more teeth Designation RE IC S APMX ap (min) ap...
-
Vendor: TaeguTecRPGN 0903 FL Flat type positive round ceramic inserts for high speed milling of super alloys with low cutting force
● DeliverableInquiry2 variantsProduct List High-speed milling of super alloys » Round type SiAlON ceramic grade inserts» High-speed milling on super alloys» Special wedge clamp with air supply nozzle» Strong clamping and stable machining» Higher productivity with more teeth Designation RE IC S APMX ap (min) ap...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DSKNR/L-Kr 75° DSDNN-Kr 45° DSSNR/L-Kr 45°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
54 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecRNGN 1207 FL Flat type negative round ceramic inserts for high speed milling of super alloys
● DeliverableInquiry6 variantsProduct List High-speed milling of super alloys » Round type SiAlON ceramic grade inserts» High-speed milling on super alloys» Special wedge clamp with air supply nozzle» Strong clamping and stable machining» Higher productivity with more teeth Designation RE IC S APMX ap (min) ap...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DDMNL-Kr 93°
● Deliverable
- From $298.03
- From $298.03
- Unit price
- per
4 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecPTKU 10-M/ML High positive double-sided inserts with economical 10 cutting edges for 65° Face mills and High Feed mills
● DeliverableInquiry5 variantsProduct List High Feed and 65° Face Mill withDouble-sided Pentagonal Insert » High feed milling and 65° face milling with same insert» Economical double-sided 10 cutting edge insert» High positive rake angle» Strong insert cutting edge» Good chip evacuation Designation IC S RE ap...
-
Vendor: SOFTOOLExternal Turning Tool Body HSK-T DDJNR/L-Kr 93° DDHNR/L-Kr 107.5° DDNNN-Kr 62.5°
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
30 variantsFeatures： For turning the external of the workpiece. Three clamping types, available in rough machining, semi-finishing, finishing machining. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market. Support non-standard customization. -
Vendor: TaeguTecPTKU 05-M/ML High positive double-sided inserts with economical 10 cutting edges for 65° Face mills and High Feed mills
● DeliverableInquiry4 variantsProduct List High Feed and 65° Face Mill withDouble-sided Pentagonal Insert » High feed milling and 65° face milling with same insert» Economical double-sided 10 cutting edge insert» High positive rake angle» Strong insert cutting edge» Good chip evacuation Designation IC S RE ap...
-
Vendor: TaeguTecNFB-SM Precision ball nose type inserts with high helical cutting edge for hardened steels and coolant channels on finishing and seme-finishing applications
● DeliverableInquiry26 variantsProduct List High-Precision and Excellent Run-out Insert for Finishing Applications » High-precision and excellent run-out blade type inserts» Asymmetric pocket design enables high-precision and better clamping» Internal coolant channels offer good chip evacuation and better tool life» Various steel and tungsten carbide shanks for...
-
Vendor: TaeguTecNFB-FM Precision ball nose type inserts with straight cutting edge & coolant channel for finishing to semi-finishing machining.FM: High accurate R & general applications
● DeliverableInquiry17 variantsProduct List High-Precision and Excellent Run-out Insert for Finishing Applications » High-precision and excellent run-out blade type inserts» Asymmetric pocket design enables high-precision and better clamping» Internal coolant channels offer good chip evacuation and better tool life» Various steel and tungsten carbide shanks for...
-
Vendor: TaeguTecLPHU 09 PNR-M Ground type tangential inserts of 4 cutting edges with sharp geometry
● DeliverableInquiry2 variantsProduct List High Productivity Shoulder Milling withStrong Tangential Insert » Strong and reliable insert» Strong tool body with larger core size» High productivity with more teeth and ramping-down application» Soft machining with high positive rake angle» 90° shoulder milling Designation L W1 S APMX...
Collections
All Indexable Tools
Indexable Cutting Tools - Indexable Inserts
Discover high-performance indexable cutting tools with replaceable inserts for precise,
cost-effective metalworking. Perfect for milling, turning, and drilling across materials like steel,
aluminum, and titanium. Durable and efficient for CNC and manual machining in automotive,
aerospace, and manufacturing industries.
cost-effective metalworking. Perfect for milling, turning, and drilling across materials like steel,
aluminum, and titanium. Durable and efficient for CNC and manual machining in automotive,
aerospace, and manufacturing industries.
Nuestros mejores vendedores
Vendor:
YG
8% COBALT (M42) Flat Shank E2193 & E2125 Series, HSS Co8, Multi Flute Regular & Long Length Coarse Pitch Roughing Ball Nose COBALT & HSS End Mills 1/4~1
Product Information
▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2015 & HSS (M2) Plain Shank E1015 Series, HSS Co8 & HSS, 2 Flute Miniature Long Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2013 & HSS (M2) Plain Shank E1013 Series, HSS Co8 & HSS, 2 Flute Miniature Regular Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2008 & HSS (M2) Plain Shank E1008 Series, HSS Co8 & HSS, 2 Flute Miniature Stub Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2069 Series, HSS Co8, 4 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
Product Information
▶ Same construction features as E2020 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2021 Series, HSS Co8, 4 Flute Long Length Ball Nose COBALT & HSS End Mills 1/4～1
Product Information
▶ Longer flute length than E2020 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2020 Series, HSS Co8, 4 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
Product Information
▶ The four flute ball end mills are designed for milling of radius bottom slots fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2112 & HSS (M2) Flat Shank E1112 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
Product Information
▶ Same construction features as E2110 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2111 & HSS (M2) Flat Shank E1111 Series, HSS Co8 & HSS, 2 Flute Extended Length Ball Nose COBALT & HSS End Mills 1/8～1
Product Information
▶ Longer flute length than E2110 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2110 & HSS (M2) Flat Shank E1110 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
Product Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two...
Inquiry
Vendor:
YG
Flat Shank E9992 Series, Premium HSS-PM, 2 Flute Regular Length Ball Nose TANK-POWER End Mills 1/8～1
Product Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute...
Inquiry
Product Information
Inquiry
Product Information
▶ Designed for milling die cavity.
▶ Many different center line angles are available on your job requirement.
Inquiry
Vendor:
YG
Plain Shank E5251 & E5252 Series, Carbide, 2&4 Flute Stub Length Double Ball Nose CARBIDE End Mills 7/32～1/2
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5062 Series, Carbide, 4 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5018 Series, Carbide, 2 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5014 & E5060 Series, Carbide, 2&4 Flute Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5250 Series, Carbide, 4 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5249 Series, Carbide, 2 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank EI450 Series, Carbide, 2 Flute Long Reach Ball Nose D-POWER GRAPHITE End Mills 2～8
Product Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
Inquiry
- Choosing a selection results in a full page refresh.