-
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical; When processing different workpieces, you only need to replace the jaws.
-
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical; When processing different workpieces, you only need to replace the jaws.
-
Vendor: BIGtoolsStraight Shank - Tension and Compression Taper Holder
● DeliverableInquiry9 variants -
BLT hollow two-jaw long-stroke hydraulic chuck has the same size as BL hollow three-jaw long-stroke hydraulic chuck; BLT jaw has a larger stroke, 3 times that of the ordinary type.
-
Vendor: BIGtoolsBT / Tension and Compression Taper Holder
● Deliverable
- From $79.76
- From $79.76
- Unit price
- per
12 variants -
-
There is a through hole in the center of the chuck, and the maximum stroke of the claw is large. The clamping range is large. It is suitable for clamping rod-type workpieces. The stroke of the BL claw is large, which is 3 times...
-
-
The center through hole is relatively large. Suitable for clamping rod-type workpieces.
-
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
-
Vendor: BIGtoolsJT / Tension and Compression Taper Holder
● Deliverable
- From $81.19
- From $81.19
- Unit price
- per
8 variants -
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
-
Vendor: BIGtoolsHSK100A Tension and Compression Taper Holder
● Deliverable
- From $310.71
- From $310.71
- Unit price
- per
3 variants -
Vendor: BIGtoolsBT-Extended Series Tension and Compression Taper Holder
● Deliverable
- From $88.10
- From $88.10
- Unit price
- per
7 variants -
It is a center through-hole chuck suitable for clamping rod-type workpieces; Repeat positioning accuracy can reach: 0.02mm.
-
Vendor: BIGtoolsMTA-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry5 variants
-
The MEA/B spreader mechanism is fed by rack and gear or single inclined wedge transmission,The feed speed is stable; The feed speed and stroke are very easy to adjust; The chuck body is surface hardened and ground, and the rigidity and durability are very...
-
MPS diaphragm chuck is a fully sealed chuck with 3-claw and 6-claw options; It is clamped based on the outer diameter P.C.D of the gear, and can process the inner diameter and end face of the gear to achieve better concentricity requirements; When processing...
-
Vendor: BIGtoolsStraight Shank-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry6 variants
-
Vendor: BIGtoolsCAT-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry6 variants
-
MPS diaphragm chuck is a fully sealed chuck with 3-claw and 6-claw options; It is clamped based on the outer diameter P.C.D of the gear, and can process the inner diameter and end face of the gear to achieve better concentricity requirements; When processing...
-
Vendor: BIGtoolsHSK-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry5 variants
-
Vendor: BIGtoolsJP-GTP High Precise Torsion Tension and Compression Tapping Holder
● Deliverable
- From $118.33
- From $118.33
- Unit price
- per
6 variants -
Kf chuck is also a special chuck for shaft processing. It takes the axis as the reference, and the jaws have compensation function. It is used when concentricity is important. The compensation amount for the center jaw is 5-10MM. Because the center uses an...
-
Vendor: BIGtoolsBT-GTP High Precise Torsion Tension and Compression Tapping Holder
● Deliverable
- From $102.86
- From $102.86
- Unit price
- per
6 variants -
The shaft processing chuck is available with a fixed center or an elastic center. Features of the end face drive chuck with a fixed center (equipped with a double piston cylinder):① Positioning with an axial center hole;② The fixed center can ensure the concentricity...
-
-
BF chuck is a back-pull flat clamping, which can be adjusted according to the thickness of the workpiece. Suitable for thin-walled workpieces that cannot be clamped due to inner and outer diameters.
-
BF chuck is a back-pull flat clamping, which can be adjusted according to the thickness of the workpiece. Suitable for thin-walled workpieces that cannot be clamped due to inner and outer diameters.
-
Collections
Nuestros mejores vendedores
- $159.76
- $159.76
- Unit price
- per
- $52.38
- $52.38
- Unit price
- per
- $28.57
- $28.57
- Unit price
- per
- $16.67
- $16.67
- Unit price
- per
- $19.05
- $19.05
- Unit price
- per
nuevos productos
Feature
Rigid material-vise body of ductile iron FCD60 JIS (equal to GGG60) with 60 kgs/mm2 or 80000 psi tensile strength.
Slide surface of vise flame with harden treatment up to HRC45° and keeps up wear and maintain abrasion resistance for long.
Inquiry
Vendor:
ChainHeadWay
CHW-_PL Powerful-Type Precision Vise (Lengthen) High-Performance Extended-Length Clamping Tool for Precision Machining
Feature
Max. opening capacity 750mm.
Inquiry
Vendor:
ChainHeadWay
CHW-_P Powerful-Type Precision Vise - Precision Machining and Workpiece Clamping
Feature
The unit had prevent lifting structure.
Mechanical power structure.
Inquiry
Feature
Mechanical power structure.
The total length is short, the big aperture, rotate the spanner to reduce effort.
Inquiry
Feature
This unit had prevent lifting structure, when clamping, downward power also gearing, so the workpiece and movable parts lift very small, the body and soild jaw is a combination structure, it does not tilt.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_C Mechanical-Type Precision Vise - Precision Machining and Workpiece Clamping
Feature
This unit had prevent lifting structure, when clamping, downward power also gearing, so the workpiece and movable parts lift very small, the body and soild jaw is a combination structure, it does not tilt.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_B Mulit-Folder Vise Fixed Block - Precision Machining and Workpiece Clamping
Feature
High rigidity type.
Holding work-piece firmly in single and multiple vises setup.
Rigid and high tensile casting of ductile iron.
Inquiry
Vendor:
ChainHeadWay
CHW-_B Mulit-Folder Vise Fixed Block - Precision Machining and Workpiece Clamping
Feature
The unit had prevent lifting structure.
Not turbo-charged organization, is suitable for clamping the soft workpiece.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_J Pneumatic Mc Precision&angle Lock Vise - Precision Machining and Workpiece Clamping
Feature Even the air source at low pressure 8kg/cm2 which can be achieved super high gripping force can be adjusted freely by pressure regulator. The shifting speed is only 1.5 sec. with safety range: 8mm, also equipped with safety line on hand wheel to easily identify...
Inquiry
Vendor:
ChainHeadWay
LM-VE-_D Double-Clamping Precision Vise - Precision Machining and Workpiece Clamping
Feature
Vise adopt downward locking structure to eliminate floating body functions.
On the machining center with a variable of processing two parts.
Spring of ductile iron FCD60.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_SD Double-Clamping Precision Vise - Precision Machining and Workpiece Clamping LM-VE-100SD
Feature With the fast double clamp mechanism, both workpieces can be clamped at the same time, also be clamped unilaterally. Vise hard jaw material is full steel and heat treatment at HRC55˚or more. Owing to its good design to use both sides of jaw since it...
Inquiry
Vendor:
ChainHeadWay
LM-VE-_JD Super Hi-Pressure Double Vise - Precision Machining and Workpiece Clamping
Feature
Having built-in floating pressing structure to provide downward locking force to eliminate flotation of vise jaw and operational slope.
Inquiry
Vendor:
ChainHeadWay
LM-VE-_JD Super Hi-Pressure Double Vise - Precision Machining and Workpiece Clamping LM-VE-530JD
Feature
Only need 8kg/cm2 of low-voltage source to achieve 4000kgf of super high gripping force, and this gripping force can be adjusted from 0-4000kgf by using a pressure regulator.
Inquiry
- Choosing a selection results in a full page refresh.