-
-
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
-
-
Vendor: 9stellarBT-Extended Series Tension and Compression Taper Holder
● DeliverableInquiry7 variants -
It is a center through-hole chuck suitable for clamping rod-type workpieces; Repeat positioning accuracy can reach: 0.02mm.
-
Vendor: 9stellarMTA-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry5 variants
-
The MEA/B spreader mechanism is fed by rack and gear or single inclined wedge transmission,The feed speed is stable; The feed speed and stroke are very easy to adjust; The chuck body is surface hardened and ground, and the rigidity and durability are very...
-
MPS diaphragm chuck is a fully sealed chuck with 3-claw and 6-claw options; It is clamped based on the outer diameter P.C.D of the gear, and can process the inner diameter and end face of the gear to achieve better concentricity requirements; When processing...
-
Vendor: 9stellarStraight Shank-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry6 variants
-
Vendor: 9stellarCAT-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry6 variants
-
MPS diaphragm chuck is a fully sealed chuck with 3-claw and 6-claw options; It is clamped based on the outer diameter P.C.D of the gear, and can process the inner diameter and end face of the gear to achieve better concentricity requirements; When processing...
-
Vendor: 9stellarHSK-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry5 variants
-
Vendor: 9stellarJP-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry6 variants
-
Kf chuck is also a special chuck for shaft processing. It takes the axis as the reference, and the jaws have compensation function. It is used when concentricity is important. The compensation amount for the center jaw is 5-10MM. Because the center uses an...
-
Vendor: 9stellarBT-GTP High Precise Torsion Tension and Compression Tapping Holder
● DeliverableInquiry6 variants
-
The shaft processing chuck is available with a fixed center or an elastic center. Features of the end face drive chuck with a fixed center (equipped with a double piston cylinder):① Positioning with an axial center hole;② The fixed center can ensure the concentricity...
-
-
BF chuck is a back-pull flat clamping, which can be adjusted according to the thickness of the workpiece. Suitable for thin-walled workpieces that cannot be clamped due to inner and outer diameters.
-
BF chuck is a back-pull flat clamping, which can be adjusted according to the thickness of the workpiece. Suitable for thin-walled workpieces that cannot be clamped due to inner and outer diameters.
-
-
-
-
-
-
The inclined column back-pull chuck is available in two-jaw, three-jaw, two-jaw and three-jaw hollow types. The inclined column back-pull chuck is suitable for workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only need to replace the clamping...
-
-
The inclined column back-pull chuck is available in two-jaw, three-jaw, two-jaw and three-jaw hollow types. The inclined column back-pull chuck is suitable for workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only need to replace the clamping...
-
Pull the workpiece towards the baffle and clamp it at the same time, so it has the function of completely sticking the workpiece to the reference surface. It is particularly suitable for workpieces that require high verticality and concentricity processing accuracy of the reference...
-
The inclined column back-pull chuck is available in two solid jaws, three jaws and two hollow jaws, three jaws. The inclined column back-pull chuck is suitable for processing workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only...
-
The inclined column back-pull chuck is available in two solid jaws, three jaws and two hollow jaws, three jaws. The inclined column back-pull chuck is suitable for processing workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only...
Collections
Nuestros mejores vendedores
nuevos productos
- Choosing a selection results in a full page refresh.