-
-
-
Vendor: BIG DAISHOWA@PJC Pinza recta (tipo Jet Through)/Gancho de pinza/Mega llave
● DeliverableInquiry5 variants -
-
-
-
Vendor: BIG DAISHOWA@Tipo de poste trasero Diámetro de sujeción: ø3 - ø10
● DeliverableInquiry5 variants
-
Vendor: BIG DAISHOWA@Tipo de sujeción en la parte posterior Diámetro de sujeción: ø3 - ø12
● DeliverableInquiry26 variants
-
Vendor: BIG DAISHOWA@Tipo de sujeción frontal Diámetro de sujeción: ø3 - ø12
● DeliverableInquiry26 variants
-
Vendor: BIG DAISHOWA@BIG PLUS SHANK Diámetro de sujeción: ø1,5 - ø16
● Deliverable
- $1,226.19
- $1,226.19
- Unit price
- per
3 variants -
Vendor: BIG DAISHOWA@BIG CAPTO SHANK Diámetro de sujeción: ø4 - ø12
● DeliverableInquiry5 variants
-
Vendor: BIG DAISHOWA@HSK-A VÁSTAGO Diámetro de sujeción: ø3 - ø12
● DeliverableInquiry25 variants
-
Vendor: BIG DAISHOWA@HSK-E VÁSTAGO Diámetro de sujeción: ø3 - ø12
● DeliverableInquiry22 variants
-
-
Vendor: BIGtoolsDispositivo de limpieza del portaherramientas TCD-30~TCD-HSK100● DeliverableInquiry6 variants
-
-
-
-
-
-
-
-
-
-
-
Vendor: BIGtoolsDispositivo de bloqueo del portaherramientas (nuevo tipo) BT\HSK\CAPPTO TMS40-32~ TMS50-100● DeliverableInquiry11 variants
-
Vendor: BIGtoolsDispositivo de bloqueo del portaherramientas BT30 ~ SK50 (CAT50)● DeliverableInquiry6 variants
-
-
-
Vendor: BIGtoolsPerno de tracción ISO 7388 / Perno de tracción CAT● DeliverableInquiry8 variants
Collections
Nuestros mejores vendedores
Mounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
Inquiry
Features： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
Inquiry
Features： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
Inquiry
Features： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
Inquiry
Features：
Outer diameter size according to DIN6499-B
Material: SUJ2
Hardness: 44-48HRC
When ordering please specify the collet type, and the size of d2. d1. W.
Inquiry
Features： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively...
Inquiry
Features： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
Inquiry
nuevos productos
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $356.44
- From $356.44
- Unit price
- per
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $606.26
- From $606.26
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $530.11
- From $530.11
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $441.49
- From $441.49
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $287.51
- From $287.51
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $284.84
- From $284.84
- Unit price
- per
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
- Choosing a selection results in a full page refresh.