-
Vendor: BIGtoolsG3 Extended - Torque Protection Tapping Collet （Metric/ISO)
● Deliverable- $16.67
- $16.67
- Unit price
- per
9 variants -
-
-
Vendor: BIGtoolsG3 - Torque Protection Tapping Collet (Japanese Standard/JIS - Inches)
● Deliverable
- $19.05
- $19.05
- Unit price
- per
13 variants -
Vendor: BIGtoolsG3 - Torque Protection Tapping Collet （Metric/ISO)
● Deliverable
- $14.29
- $14.29
- Unit price
- per
9 variants -
-
-
Figure 1 is for direct mounting - when the spindle size and chuck diameter are standard; Figures 2 and 3 are for indirect mounting (reduction and increase) - when the spindle size and chuck diameter are not standard.
-
-
-
-
Vendor: BIGtoolsKY-RE Solid Double Piston Hydraulic Rotary Cylinder (Air Injection)
● DeliverableInquiry1 variants
-
This is a high-speed through-hole rotary cylinder equipped with a high-speed diagnostic valve to prevent a sudden drop in pressure during a power outage; Lightweight and capable of high-speed rotation; Large through-hole, capable of using a wider range of rods; A variety of rotary...
-
Vendor: BIGtoolsStraight Shank - Rigid Tension and Compression Taper Holder
● DeliverableInquiry15 variants
-
-
This is a high-speed through-hole rotary cylinder equipped with a high-speed diagnostic valve to prevent a sudden drop in pressure during a power outage;it is light in weight and can rotate at high speed; the through-hole is large, allowing a wider range of rods...
-
This is a commonly used rotary cylinder, which is light in weight and small in size, and can be installed in many devices in horizontal or vertical directions.
-
Vendor: BIGtoolsNW-R,ER Solid Double-Piston Hydraulic Rotary Cylinder
● DeliverableInquiry4 variants
-
Vendor: BIGtoolsB-RE Closed Center Rotary Hydraulic Cylinder with Safety Device And Stroke Control
● DeliverableInquiry5 variantsA solid hydraulic rotary cylinder that can determine the position.It is equipped with a high-speed diagnostic valve to prevent sudden pressure drop during power failure. Many devices can be installed in both horizontal and vertical directions.
-
Vendor: BIGtoolsB-R Closed Center Rotary Hydraulic Cylinder with Safety Device
● DeliverableInquiry5 variantsThe most commonly used rotary cylinder, it is equipped with a high-speed diagnostic valve to prevent a sudden drop in pressure during a power outage, and many devices can be installed in both horizontal and vertical directions.
-
The aluminum alloy exterior structure is lighter and smaller than traditional rotary cylinders.It can maintain stable performance and reduce the mechanical burden during high-speed rotation.
-
Vendor: BIGtoolsCAT-JT Rigid Tension and Compression Taper Holder
● DeliverableInquiry15 variants
-
LUE built-in internal support gas and hydraulic chucks are assembled with PUE internal support chucks and LY vertical cylinders; Chucks fixed on drilling machines, milling machines or machining centers are easy to use, exquisitely designed, and simple to install; LUE built-in oblique column gas...
-
Vendor: BIGtoolsBT50 - Rigid Tension and Compression Taper Holder
● Deliverable
- From $107.38
- From $107.38
- Unit price
- per
6 variants -
The inclined column design provides high precision and strong clamping force during processing; Suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers; Can use air pressure or oil pressure.
-
Easy to install on fixed cylinders such as drilling machines, milling machines, tapping machines and machining centers. Can be operated by air pressure or oil pressure.
-
Vendor: BIGtoolsBT40 - Rigid Tension and Compression Taper Holder
● Deliverable
- From $89.76
- From $89.76
- Unit price
- per
5 variants -
There is a through hole in the center of the chuck; It is suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers. Multiple chucks can be assembled on the platform to save downtime; It can use air...
-
Vendor: BIGtoolsBT30 - Rigid Tension and Compression Taper Holder
● Deliverable
- From $86.90
- From $86.90
- Unit price
- per
5 variants
Collections
Nuestros mejores vendedores
Mounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
Inquiry
Features： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
Inquiry
Features： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
Inquiry
Features： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
Inquiry
Features：
Outer diameter size according to DIN6499-B
Material: SUJ2
Hardness: 44-48HRC
When ordering please specify the collet type, and the size of d2. d1. W.
Inquiry
Features： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively...
Inquiry
Features： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
Inquiry
nuevos productos
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $356.44
- From $356.44
- Unit price
- per
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $606.26
- From $606.26
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $530.11
- From $530.11
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $441.49
- From $441.49
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $287.51
- From $287.51
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $284.84
- From $284.84
- Unit price
- per
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
- Choosing a selection results in a full page refresh.