-
Vendor: TaeguTec2F 16/20/25/30/32-M Ball nose end mills for rough or semi-finish profiling with T-FLEXTEC modular adaptation with one insert of both internal and external pockets in diameters of 16/20/25/30/32 mm
● DeliverableInquiry5 variantsProduct List 2 Effective Ball End Mills for High Feed Rough Profile Milling » Economical double-sided 2 cutting edge insert for center and peripheral pocket» High-precision ground insert with high helix cutting edge for smooth cut» Dovetail pocket design for high stability and rigid... -
Vendor: TaeguTec2FB 16/20/25-ML Double-sided ball nose inserts with two helical cutting edges for roughing & semi-finishing for high temperature alloys and stainless steels
● DeliverableInquiry8 variantsProduct List 2 Effective Ball End Mills for High Feed Rough Profile Milling » Economical double-sided 2 cutting edge insert for center and peripheral pocket» High-precision ground insert with high helix cutting edge for smooth cut» Dovetail pocket design for high stability and rigid...
-
Vendor: TaeguTec2FB 16/20/25/30/32-M. Double-sided ball nose inserts with two helical cutting edges for roughing & semi-finishing in general applications
● DeliverableInquiry23 variantsProduct List 2 Effective Ball End Mills for High Feed Rough Profile Milling » Economical double-sided 2 cutting edge insert for center and peripheral pocket» High-precision ground insert with high helix cutting edge for smooth cut» Dovetail pocket design for high stability and rigid...
-
Vendor: TaeguTec2S-TE90AP-09 90° End mills with high positive two helical cutting edges of APKT 09 inserts
● DeliverableInquiry40 variantsProduct List 90° Shoulder Milling Line with Long Type High Helix Cutting Edge Inserts » Single sided 2 cutting edge insert for real 90° shoulder milling» Soft machining with high positive axial and radial cutting edge» Long cutting edge suitable for high depth of...
-
Vendor: TaeguTec2S-TE90AP-19 90° End mills with strong APKT 19 inserts for roughing of heavy industry parts such as wind mills and power generation parts and general applications
● DeliverableInquiry1 variantsProduct List Designation DC CICT DCONMS OAL LU APMX Weight/kg MIID 2S-TE90AP 340-W32-19 40.00 3 32.00 115.00 40.00 17.90 0.69 APKT 190712R-MR
-
Vendor: TaeguTec2S-TE90AP-M-09 90° Modular end mills with T-FLEXTEC adaptation & high positive two helical cutting edges of APKT 09 inserts
● DeliverableInquiry13 variantsProduct List 90° Shoulder Milling Line with Long Type High Helix Cutting Edge Inserts » Single sided 2 cutting edge insert for real 90° shoulder milling» Soft machining with high positive axial and radial cutting edge» Long cutting edge suitable for high depth of...
-
Vendor: TaeguTec2S-TE90CV-05 End mills with unique high positive V shape inserts of two cutting edges for shouldering and high feed milling
● DeliverableInquiry22 variantsProduct List Mini Sized Shoulder Mill and High Feed Mill with V-Shaped Insert » Indexable mini size end mill» Increased number of inserts for improved productivity» High rake angle for reduced cutting load and excellent chip evacuation» Enhanced machinability due to the insert's reinforced...
-
Vendor: TaeguTec2S-TE90CV-M-05 End mills with T-FLEXTEC modular adaptation & unique high positive & rigid V shape inserts of two cutting edges for shouldering and high feed milling
● DeliverableInquiry6 variantsProduct List Mini Sized Shoulder Mill and High Feed Mill with V-Shaped Insert » Indexable mini size end mill» Increased number of inserts for improved productivity» High rake angle for reduced cutting load and excellent chip evacuation» Enhanced machinability due to the insert's reinforced...
-
Vendor: TaeguTec2S-TE90CV-S-05 End mills with MAXIRUSH modular adaptation & unique high positive & rigid V shape inserts of two cutting edges for shouldering and high feed milling
● DeliverableInquiry3 variantsProduct List Mini Sized Shoulder Mill and High Feed Mill with V-Shaped Insert » Indexable mini size end mill» Increased number of inserts for improved productivity» High rake angle for reduced cutting load and excellent chip evacuation» Enhanced machinability due to the insert's reinforced...
-
Vendor: TaeguTec2S-TFM90AP-R-09 90° Face mills with high positive two helical cutting edges of APKT 09 inserts
● DeliverableInquiry7 variantsProduct List 90° Shoulder Milling Line with Long Type High Helix Cutting Edge Inserts » Single sided 2 cutting edge insert for real 90° shoulder milling» Soft machining with high positive axial and radial cutting edge» Long cutting edge suitable for high depth of...
-
Vendor: TaeguTec2S-TFM90AP-R-19 90° Face mills with strong APKT 19 inserts for roughing of heavy industry parts of wind mills and power generations
● DeliverableInquiry9 variantsProduct List 90° Shoulder Milling Line with Long Type High Helix Cutting Edge Inserts » Single sided 2 cutting edge insert for real 90° shoulder milling» Soft machining with high positive axial and radial cutting edge» Long cutting edge suitable for high depth of...
-
-
Vendor: SOFTOOL3-Jaw Clined Pull Air-Tight Power Chuck BC530-YX-306-A205 BC530-YX-308-A205
● DeliverableInquiry5 variantsFeatures： With workpiece can do radial clamp and axial pulldown at the same time, which able to closer surface of the chuck. Can cooperate with the airtight detection, and axlal position confirm, suitable for the precise length control machine requirements. Chuck Actuators with cylindrical structure are... -
Vendor: SOFTOOL3-Jaw Hollow Power Chuck BC510-YK-304 BC510-YK-305-A204
● DeliverableInquiry11 variantsFeatures： High strength stable wearable High precision,hign cycle life
-
KEY ADVANTAGES Extremely fast conversion without detachment of the basic clamping device [1-2min.] Large clamping range and vibration dampening due to vulcanized clamping elements Standard segmented clamping bushings and workpiece endstops for machine to size available
-
Vendor: SOFTOOL3-Jaw Pull Ball-Lock Power Chuck BC520-QS-306 BC520-QS-308 BC520-QS-310
● DeliverableInquiry3 variantsFeatures： Suitable for clamping forging and casting parts. The claw moves freely about 5 degrees and has a strong clamping force. The ball design of the main jaw can prevents effectively the debris and coolant from entering the chuck. Deviation adjustment of 5 degrees...
-
Vendor: SOFTOOL3-Jaw Stationary Chuck with Through-Hole BC550-KL-305 BC550-KL-306
● DeliverableInquiry5 variantsFeatures： Suitable for drilling, milling and Machining, center. Simple installation:Asingle installation requires onlytype screw. Group to Install: Install a number of chuck plates on the plate, You can quickly replactit. Soft jaw and hardened jaw can be replaced to save cost.
-
Features & Benefits The Mitutoyo 3-wire thread measuring system features hardened, precision lapped wires for accurate results and longer wire lifespan. This measuring system reduces measurement time to a fraction of the time normally taken using the traditional three-wire method. Available in Metric and...
-
Features & Benefits The Mitutoyo 3-wire thread measuring system features hardened, precision lapped wires for accurate results and longer wire lifespan. This measuring system reduces measurement time to a fraction of the time normally taken using the traditional three-wire method. Available in Metric and...
-
Vendor: TaeguTec3ED ...-P+ Exchangeable 3 flute drill heads for steels and cast irons with high productivity
● DeliverableInquiry99 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED ...F Exchangeable 3 flute drill heads for flat bottom hole machining with high productivity in steel and cast iron.
● DeliverableInquiry28 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED-3XD (Cylindrical Shank) Head changeable 3 flute drills with coolant holes for high productivity
● DeliverableInquiry17 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED-3XD (Weldon Shank) Head changeable 3 flute drills with coolant holes for high productivity
● DeliverableInquiry17 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED-5XD (Cylindrical Shank) Head changeable 3 flute drills with cylindrical shank (5xD)and coolant holes
● DeliverableInquiry17 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED-5XD (Weldon Shank) Head changeable 3 flute drills with coolant holes for high productivity
● DeliverableInquiry17 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED-8XD (Cylindrical Shank) Head changeable 3 flute drills with cylindrical shank and coolant holes
● DeliverableInquiry17 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3ED-8XD (Weldon Shank) Head changeable 3 flute drills with coolant holes for high productivity
● DeliverableInquiry17 variantsProduct List Head Changeable 3 Effective Cutting Edge Drills » Self-centering P+ geometry and premium hole quality» Higher productivity thanks to 3 effective cutting edges» No set-up time with user-friendly clamping» New TT5130 grade for high-speed machining» Diameter Ø12.0 mm – Ø25.9 mm range...
-
Vendor: TaeguTec3F 32/50-W Three effective ball nose end mills with Weldon shank and unique doubles-sided inserts of 3FB for higher productivity in diameters of 32 & 50 mm
● DeliverableInquiry6 variantsProduct List 3 Effective Ball End Mills for High Feed Rough Profile Milling » 3 effective flute design enables high feed and high productive machining» Economical double-sided 2 cutting edge insert for center (-C) and periphery (-P) sides» Thicker insert offers stable and strong...
-
Vendor: TaeguTec3F 50-CN Three effective ball nose end mills with combination shank & unique double-sided inserts of 3FB for high productivity in diameter of 50 mm
● DeliverableInquiry1 variantsProduct List 3 Effective Ball End Mills for High Feed Rough Profile Milling » 3 effective flute design enables high feed and high productive machining» Economical double-sided 2 cutting edge insert for center (-C) and periphery (-P) sides» Thicker insert offers stable and strong...
-
Vendor: TaeguTec3FB C-M/P-M Ball nose inserts with two helical cutting edges for three effective ball end mills for rough & semi-finish profiling in double-sided types of center (C-M) or periphery (P-M) sides
● DeliverableInquiry8 variantsProduct List 3 Effective Ball End Mills for High Feed Rough Profile Milling » 3 effective flute design enables high feed and high productive machining» Economical double-sided 2 cutting edge insert for center (-C) and periphery (-P) sides» Thicker insert offers stable and strong...
Related categories
3 Flute Carbide Drills
BIG DAISHOWA
Carbide Drill Bits
Coolant
Damping Tools
Deburring Tools
Digimatic
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
Extrnal
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Internal
Internal Coolant
ISCAR
Large Diameter Boring
Mega Chuck
Micro Deep End Mills
PB Swiss Tools
PCD Drill
PCD End Mills
Rough Boring
Roughing End Mills
Small Parts Machining
Solid End Mills for Dental
Swiss Type Lathe
TaeguTec
Without Coolant
ZCCT