-
Vendor: SOFTOOLPSC-SR Adapter Handle-R/LX-L1 45° PSC50-SR32-RX-045-L1 PSC63-SR32-RX-045-L1
● Deliverable- From $393.00
- From $393.00
- Unit price
- per
5 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Adapter Handle-R/LX-T 45° PSC40-SR32-RX-045-T PSC40-SR32-LX-045-T
● Deliverable
- $307.61
- $307.61
- Unit price
- per
2 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Face Slotting Adapter-F 90° PSC40-SR32-60-RF PSC40-SR32-60-LF
● Deliverable
- From $311.46
- From $311.46
- Unit price
- per
12 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Face Slotting Adapter-R/L PSC32-SR16-033R PSC32-SR16-033L
● Deliverable
- From $342.32
- From $342.32
- Unit price
- per
40 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Face Slotting PSC32-SR16-045 PSC32-SR20-050
● Deliverable
- From $342.32
- From $342.32
- Unit price
- per
27 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR70 Adapter Handle-R/LF 90° PSC50-SR70-RF-043 PSC50-SR70-LF-043
● Deliverable
- From $410.36
- From $410.36
- Unit price
- per
8 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR70 Adapter Handle-R/LG 0° PSC50-SR70-RG-050 PSC50-SR70-LG-050
● Deliverable
- From $410.36
- From $410.36
- Unit price
- per
8 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR70 Adapter Handle-R/LX 45° PSC50-SR70-RX-045-050 PSC50-SR70-LX-045-050
● Deliverable
- From $574.29
- From $574.29
- Unit price
- per
10 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Feature Internal tolerance is H6. The tool holder with through coolant design is better for water to get through vibration resistance.
-
Vendor: ChainHeadWayPSC/PMB Damping Fine Boring Head – for CNC Machining Centers
● DeliverableInquiry4 variants -
Vendor: BIGtoolsPSKN R/L Portaherramientas de torneado AP
● Deliverable- From $18.57
- From $18.57
- Unit price
- per
4 variants -
Vendor: BIGtoolsPSSN R/L Portaherramientas de torneado AP
● Deliverable
- From $18.57
- From $18.57
- Unit price
- per
12 variants -
Vendor: BIGtoolsPTFN R/L Portaherramientas de torneado AP
● Deliverable
- From $17.14
- From $17.14
- Unit price
- per
6 variants -
Vendor: BIGtoolsPTG(J)NR/L Portaherramientas de torneado AP
● Deliverable
- From $17.14
- From $17.14
- Unit price
- per
3 variants -
Vendor: TaeguTecPTKU 05-M/ML High positive double-sided inserts with economical 10 cutting edges for 65° Face mills and High Feed mills
● DeliverableInquiry4 variantsProduct List High Feed and 65° Face Mill withDouble-sided Pentagonal Insert » High feed milling and 65° face milling with same insert» Economical double-sided 10 cutting edge insert» High positive rake angle» Strong insert cutting edge» Good chip evacuation Designation IC S RE ap... -
Vendor: TaeguTecPTKU 10-M/ML High positive double-sided inserts with economical 10 cutting edges for 65° Face mills and High Feed mills
● DeliverableInquiry5 variantsProduct List High Feed and 65° Face Mill withDouble-sided Pentagonal Insert » High feed milling and 65° face milling with same insert» Economical double-sided 10 cutting edge insert» High positive rake angle» Strong insert cutting edge» Good chip evacuation Designation IC S RE ap...
-
The inclined column back-pull chuck is available in two-jaw, three-jaw, two-jaw and three-jaw hollow types. The inclined column back-pull chuck is suitable for workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only need to replace the clamping...
-
Pull the workpiece towards the baffle and clamp it at the same time, so it has the function of completely sticking the workpiece to the reference surface. It is particularly suitable for workpieces that require high verticality and concentricity processing accuracy of the reference...
-
Vendor: BIGtoolsPortabrocas de tracción hacia atrás DC BT30/40/50-DC06-60~200● DeliverableInquiry28 variants
-
Vendor: BIGtoolsPortabrocas de extracción hacia atrás HSK63A-DC06-60~DC12-200● DeliverableInquiry21 variants
-
Vendor: BIGtoolsPortabrocas de extracción hacia atrás SK30-DC06-60~12-200● DeliverableInquiry28 variants
-
Vendor: SOFTOOLPull Compensating Power Chuck BC540-YF-306-A205 BC540-YF-308-A205
● DeliverableInquiry2 variantsFeatures： Spindle type machine fixture, the card claw has the function of postpull and compensating clamp on the workpiece, (The chuck holds the torque and rear pullof the processing) For jaw compensation to the cener,thestandardis @5mm and available for up to @10mm. Based on the center...
-
-
-
Working principleWorking principle: The tool adopts the self-centering principle, and the roller is adjusted by the mandrel to produce striking and rolling movements. It can be used directly on rotary machine tools such as drilling, turning, and milling. Product performance specifications1. It can be...
-
The inclined column back-pull chuck is available in two-jaw, three-jaw, two-jaw and three-jaw hollow types. The inclined column back-pull chuck is suitable for workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only need to replace the clamping...
-
Vendor: BIGtoolsPWLN R/L Portaherramientas de torneado AP
● Deliverable
- From $17.14
- From $17.14
- Unit price
- per
5 variants -
Vendor: ZCC.CTSerie QCH QCH - APKT Kr: 90° QCH-16/20/25/32/40/-APKT11-M8/10/12/16-02/03/05/06
● Deliverable- $124.44
- $124.44
- Unit price
- per
8 variants -
Vendor: ZCC.CTSerie QCH QCH - RD QCH-15/20/35/32/42-RDKW0702/1003/12T3-M8/10/12/16-02/04/05/
● DeliverableInquiry14 variants
-
Vendor: ZCC.CTSerie QCH QCH - RD QCH-16/20/25/32-RD07/10/16-M8/10/12/16-02/03
● DeliverableInquiry7 variants
Related categories
3 Flute Carbide Drills
BIG DAISHOWA
Carbide Drill Bits
Coolant
Damping Tools
Deburring Tools
Digimatic
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
External Coolant
Extrnal
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Insert
Internal
Internal Coolant
ISCAR
Large Diameter Boring
Mega Chuck
Micro Deep End Mills
Modular Drill
PB Swiss Tools
PCD Drill
PCD End Mills
Rough Boring
Roughing End Mills
Ruby
Shallow Hole Drill
Small Parts Machining
Solid End Mills for Dental
Swiss Type Lathe
TaeguTec
Tungsten carbide
Without Coolant
ZCCT