-
The NHRD chuck has expanded the center positioning function based on the NHR chuck to ensure the position accuracy of the workpiece during drilling. The NHRD chuck indexing is 8×45°, 4×90°. The NHRD chuck has the same convenient jaw replacement and connection method as...
-
NHRF chuck has dual sensing signal device. NHRF chuck can be divided into 8x45° 4x90°. NHRF chuck can replace the jaws and the connection method is as convenient as NHR.
-
NHRL chuck can be indexed 2×180°. After the part is clamped once, two surfaces can be processed. NHRL chuck can be easily replaced and connected as NHR.
-
NHRP chuck is suitable for processing flat parts and long-axis workpieces. NHRP chuck is equipped with a strong or weak adjustment switch, which can adjust the clamping force according to needs. NHRP chuck has the same convenient jaw replacement and connection method as NHR....
-
NHRR chuck is based on NHR chuck, with new design and improvement. NHRR chuck solves the problem of center clamping of some parts (precision castings, pipe joints, etc.) due to certain precision requirements on the machined or unmachined surfaces. NHRR chuck has the same...
-
Vendor: BIGtoolsNHRS 90° Additional Angle Type Auto Indexing Chuck
● DeliverableInquiry1 variantsNHRS chuck can be divided into 4x90° and additional divisions of 3°, 4°, 5° are also available. After the parts are installed at one time, more than 4 surfaces can be processed. NHRS chuck has the same convenient jaw replacement and connection method as... -
Due to the small outer diameter of the card, it is suitable for small teaching and control lathes. There is no clamping force loss during work, and a large clamping force can be obtained with a small oil pressure. Automatic indexing can be performed...
-
One clamping can process more than 2 stations. Automatic indexing can be performed when the spindle rotates, and 6X60° or 3X120° indexing can be performed. The clamping and indexing of parts are linked by the oil piston coupling in the chuck.
-
Nikken Automatic Back Spot-Facing Arbor ● Mechanical automatic blade in/out system with no swarf adhesion● No need for stopper block● Oil Holes are standard● The front-end arbor is changeable to suit different facing diameters.
-
-
Vendor: SOFTOOLNozzle - Provide Optimal Internal Coolant Supply for Hsk Chucks
● DeliverableInquiry7 variants -
-
Vendor: TaeguTecNPHT...R-G-P/R-HF-P Precision peripheral inserts for TBTA-FB high feed deep drill heads (dia 25-65 mm) & TRGD3 Gun drill holders (dia 29-36 mm)
● DeliverableInquiry32 variantsProduct List Designation W1 INSL S RE Grade & Vc NPHT 060304R-G-P 6.00 8.00 3.00 0.40 TT6130 TT9030 NPHT 060308R-G-P 6.00 8.00 3.00 0.80 TT5030 TT9130 TT9030 NPHT 060308R-HF-P 6.00 8.00 3.00 0.80 TT5030 TT9030 NPHT 080404R-G-P 7.50 10.00 4.00 0.40 TT5030 TT6130 TT9030... -
Vendor: TaeguTecNPMT...L-G-C/L-HF-C Center inserts for TBTA-FB high feed deep drill heads (dia 25-65 mm) & TRGD3 Gun drill holders (dia 29-36 mm)
● DeliverableInquiry28 variantsProduct List Designation W1 INSL S RE Grade & Vc NPMT 060308L-G-C 5.50 8.00 3.00 0.80 TT5030 TT9130 TT6130 TT9030 NPMT 070408L-G-C 6.50 10.00 4.00 0.80 TT5030 TT9130 TT6130 TT9030 NPMT 080408L-G-C 8.00 10.00 4.00 0.80 TT5030 TT9130 TT6130 TT9030 TT8125 NPMT 100408L-G-C 9.50...
-
Vendor: TaeguTecNPMT...R-G-I/R-HF-I Intermediate inserts for TBTA-FB high feed deep drill heads (dia 25-65 mm) & TRGD3 Gun drill holders (dia 29-36 mm)
● DeliverableInquiry28 variantsProduct List Designation W1 INSL S RE Grade & Vc NPMT 060304R-G-I 5.50 8.00 3.00 0.40 TT5030 TT9130 TT6130 TT9030 NPMT 070404R-G-I 6.50 10.00 4.00 0.40 TT5030 TT9130 TT6130 TT9030 TT8125 NPMT 080404R-G-I 8.00 10.00 4.00 0.40 TT5030 TT9130 TT6130 TT9030 TT8125 NPMT 100404R-G-I...
-
Vendor: TaeguTecNPMX 08-RB/RG Deep drilling inserts for TBTA3 cartridge type heads covering dia 38-47.99 mm
● DeliverableInquiry2 variantsProduct List Designation IC S RE L Grade & Vc NPMX 080304R-B 8.00 3.18 0.80 8.36 TT9030 NPMX 080308R-G 8.00 3.18 0.80 8.36 TT9030
-
Vendor: VargusNPS Helical Flutes with Thru-Hole Coolant Solid Carbide Thread Milling Tools
● DeliverableInquiry5 variants -
-
-
-
-
Vendor: VargusNPT/ NPTF Helical Flutes Solid Carbide Thread Milling Tools
● DeliverableInquiry14 variants
-
Vendor: VargusNPT/ANPT Helical Flutes with Thru-Hole Coolant Solid Carbide Thread Milling Tools
● DeliverableInquiry9 variants
-
-
Vendor: VargusNPTF/ BSPT Helical Flutes with Thru-Hole Coolant Solid Carbide Thread Milling Tools
● DeliverableInquiry13 variants
-
-
-
-
Used for processing square or special-shaped workpieces; Strong clamping force, capable of strong chip cutting; Use connecting plate for connection.
-
Vendor: BIGtoolsNW-R,ER Solid Double-Piston Hydraulic Rotary Cylinder
● DeliverableInquiry4 variants
Related categories
3 Flute Carbide Drills
BIG DAISHOWA
Carbide Drill Bits
Coolant
Damping Tools
Deburring Tools
Digimatic
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
External Coolant
Extrnal
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Insert
Internal
Internal Coolant
ISCAR
Large Diameter Boring
Mega Chuck
Micro Deep End Mills
Modular Drill
PB Swiss Tools
PCD Drill
PCD End Mills
Rough Boring
Roughing End Mills
Ruby
Shallow Hole Drill
Small Parts Machining
Solid End Mills for Dental
Swiss Type Lathe
TaeguTec
Tungsten carbide
Without Coolant
ZCCT