-
Vendor: SOFTOOLPSC Side Lock End Mill Holder-Axial PSC32 PSC40 PSC50 PSC63 PSC80
● Deliverable- From $249.32
- From $249.32
- Unit price
- per
28 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLPSC with Type ER PSC32 PSC40 PSC50 PSC63 PSC80
● Deliverable
- From $272.46
- From $272.46
- Unit price
- per
20 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLSK with Type PSC Adaptor SK40 SK50
● Deliverable
- From $258.00
- From $258.00
- Unit price
- per
18 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLNozzle - Provide Optimal Internal Coolant Supply for Hsk Chucks
● DeliverableInquiry7 variants
-
-
Vendor: SOFTOOLBack Up Screw - Length--Adjusting Screw With Through Hole
● DeliverableInquiry8 variants
-
Vendor: SOFTOOLLocking Screw - Apply Pressure To The Plunger; Fixed Torque For Reasonable Pressure
● DeliverableInquiry4 variants
-
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry97 variantsFeatures: Material: SUJ2(High-carbon bearing steel: After heat treatment, it has hardness and toughness, better grinding quality, good flexibility, and longer using life span). HRC: HRC44-48. Surface roughness: within RZ2.5. Chucking range: ER8=0.5mm; ER11/16/20/25/32/40=1mm. But if the internal hole is less than 2.5mm, the chucking...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry4 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry50 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry2 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry6 variants
-
Vendor: BIGtoolsGER Tapping Collet (Metric/ISO, Japanese standard/JIS, German standard/DIN)
● DeliverableInquiry43 variants -
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry5 variantsFeatures： Outer diameter size according to DIN6499-B Material: SUJ2 Hardness: 44-48HRC When ordering please specify the collet type, and the size of d2. d1. W.
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry11 variantsFeatures： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry6 variantsFeatures： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry6 variantsFeatures： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry12 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry12 variantsFeatures: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry2 variantsFeatures: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry62 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry19 variantsMounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry5 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry5 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry5 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry4 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry3 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry2 variants
-
Vendor: SOFTOOLPortabrocas ER con tuerca UM HSK63A-ER16UM-160T~ER40-120
● DeliverableInquiry4 variants
Collections
- Choosing a selection results in a full page refresh.