![[CK AUTO TAPPER E] M3 - M24 Combination With A Long Type CK Shank is Convenient When Long Tapper Is Required](http://big-tools.com/cdn/shop/files/CKAUTOTAPPERE_M3-M24CombinationwithalongtypeCKShankisconvenientwhenlongtapperisrequired-1_785x.jpg?v=1719199920)
![[CK AUTO TAPPER E] M3 - M24 Combination With A Long Type CK Shank is Convenient When Long Tapper Is Required](http://big-tools.com/cdn/shop/files/CKAUTOTAPPERE_M3-M24CombinationwithalongtypeCKShankisconvenientwhenlongtapperisrequired-2_785x.jpg?v=1719199920)
-
LUE built-in internal support gas and hydraulic chucks are assembled with PUE internal support chucks and LY vertical cylinders; Chucks fixed on drilling machines, milling machines or machining centers are easy to use, exquisitely designed, and simple to install; LUE built-in oblique column gas...
-
Vendor: 9stellarBT50 - Rigid Tension and Compression Tapping Holder
● DeliverableInquiry16 variants -
The inclined column design provides high precision and strong clamping force during processing; Suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers; Can use air pressure or oil pressure.
-
Easy to install on fixed cylinders such as drilling machines, milling machines, tapping machines and machining centers. Can be operated by air pressure or oil pressure.
-
Vendor: 9stellarBT40 - Rigid Tension and Compression Tapping Holder● DeliverableInquiry10 variants
-
There is a through hole in the center of the chuck; It is suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers. Multiple chucks can be assembled on the platform to save downtime; It can use air...
-
Vendor: 9stellarBT30 - Rigid Tension and Compression Tapping Holder● DeliverableInquiry5 variants
-
Suitable for processing square and special-shaped objects. Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.: Easy to use because it uses pneumatic pressure. Small design and easy installation.
-
Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.: Easy to use because it uses pneumatic pressure. Small design and easy installation.
-
Used for processing square or special-shaped workpieces; Strong clamping force, capable of strong chip cutting; Use connecting plate for connection.
-
-
Vendor: 9stellarHSK63A - Rigid Tension and Compression Tapping Holder● DeliverableInquiry5 variants
-
Vendor: 9stellarHSK100A - Rigid Tension and Compression Tapping Holder● DeliverableInquiry5 variants
-
It is a crank type chuck; It has strong clamping force and can do strong cutting; If you need to customize a chuck with different specifications and large stroke, please contact us.
-
It is a crank type chuck; It has strong clamping force and can do strong cutting; If you need to customize a chuck with different specifications and large stroke, please contact us.
-
KV/A for vertical lathes.
-
Vendor: 9stellarMorse Inner Cone - Tension and Compression Taper Holder● DeliverableInquiry6 variants
-
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
-
Vendor: 9stellarMorse Inner Cone - Tension and Compression Taper Chuck● DeliverableInquiry7 variants
-
Vendor: 9stellarMorse without Flat Tail - Tension and Compression Taper Holder / MTB● DeliverableInquiry7 variants
-
Vendor: 9stellarMorse with Flat Tail - Tension and Compression Taper Holder / MTA● DeliverableInquiry12 variants
-
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
-
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical; When processing different workpieces, you only need to replace the jaws.
-
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical; When processing different workpieces, you only need to replace the jaws.
-
Vendor: 9stellarStraight Shank - Tension and Compression Taper Holder● DeliverableInquiry9 variants
-
BLT hollow two-jaw long-stroke hydraulic chuck has the same size as BL hollow three-jaw long-stroke hydraulic chuck; BLT jaw has a larger stroke, 3 times that of the ordinary type.
-
-
-
There is a through hole in the center of the chuck, and the maximum stroke of the claw is large. The clamping range is large. It is suitable for clamping rod-type workpieces. The stroke of the BL claw is large, which is 3 times...
-
Collections
Our Top Sellers
- From $202.00
- From $202.00
- Unit price
- per
- From $507.00
- From $507.00
- Unit price
- per
New Products
LUE built-in internal support gas and hydraulic chucks are assembled with PUE internal support chucks and LY vertical cylinders; Chucks fixed on drilling machines, milling machines or machining centers are easy to use, exquisitely designed, and simple to install; LUE built-in oblique column gas...
Inquiry
The inclined column design provides high precision and strong clamping force during processing;
Suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers;
Can use air pressure or oil pressure.
Inquiry
Vendor:
9stellar
LY Vertical Cylinder
Easy to install on fixed cylinders such as drilling machines, milling machines, tapping machines and machining centers.
Can be operated by air pressure or oil pressure.
Inquiry
There is a through hole in the center of the chuck; It is suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers. Multiple chucks can be assembled on the platform to save downtime; It can use air...
Inquiry
Suitable for processing square and special-shaped objects.
Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.:
Easy to use because it uses pneumatic pressure. Small design and easy installation.
Inquiry
Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.:
Easy to use because it uses pneumatic pressure. Small design and easy installation.
Inquiry
Used for processing square or special-shaped workpieces;
Strong clamping force, capable of strong chip cutting;
Use connecting plate for connection.
Inquiry
It is a crank type chuck;
It has strong clamping force and can do strong cutting;
If you need to customize a chuck with different specifications and large stroke, please contact us.
Inquiry
It is a crank type chuck;
It has strong clamping force and can do strong cutting;
If you need to customize a chuck with different specifications and large stroke, please contact us.
Inquiry
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
Inquiry
- Choosing a selection results in a full page refresh.