-
LUE built-in internal support gas and hydraulic chucks are assembled with PUE internal support chucks and LY vertical cylinders; Chucks fixed on drilling machines, milling machines or machining centers are easy to use, exquisitely designed, and simple to install; LUE built-in oblique column gas...
-
The inclined column design provides high precision and strong clamping force during processing; Suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers; Can use air pressure or oil pressure.
-
Easy to install on fixed cylinders such as drilling machines, milling machines, tapping machines and machining centers. Can be operated by air pressure or oil pressure.
-
There is a through hole in the center of the chuck; It is suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers. Multiple chucks can be assembled on the platform to save downtime; It can use air...
-
Suitable for processing square and special-shaped objects. Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.: Easy to use because it uses pneumatic pressure. Small design and easy installation.
-
Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.: Easy to use because it uses pneumatic pressure. Small design and easy installation.
-
Used for processing square or special-shaped workpieces; Strong clamping force, capable of strong chip cutting; Use connecting plate for connection.
-
It is a crank type chuck; It has strong clamping force and can do strong cutting; If you need to customize a chuck with different specifications and large stroke, please contact us.
-
It is a crank type chuck; It has strong clamping force and can do strong cutting; If you need to customize a chuck with different specifications and large stroke, please contact us.
-
KV/A for vertical lathes.
-
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
-
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
-
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical; When processing different workpieces, you only need to replace the jaws.
-
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical; When processing different workpieces, you only need to replace the jaws.
-
BLT hollow two-jaw long-stroke hydraulic chuck has the same size as BL hollow three-jaw long-stroke hydraulic chuck; BLT jaw has a larger stroke, 3 times that of the ordinary type.
-
There is a through hole in the center of the chuck, and the maximum stroke of the claw is large. The clamping range is large. It is suitable for clamping rod-type workpieces. The stroke of the BL claw is large, which is 3 times...
-
The center through hole is relatively large. Suitable for clamping rod-type workpieces.
-
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
-
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
-
It is a center through-hole chuck suitable for clamping rod-type workpieces; Repeat positioning accuracy can reach: 0.02mm.
-
The MEA/B spreader mechanism is fed by rack and gear or single inclined wedge transmission,The feed speed is stable; The feed speed and stroke are very easy to adjust; The chuck body is surface hardened and ground, and the rigidity and durability are very...
-
MPS diaphragm chuck is a fully sealed chuck with 3-claw and 6-claw options; It is clamped based on the outer diameter P.C.D of the gear, and can process the inner diameter and end face of the gear to achieve better concentricity requirements; When processing...
-
MPS diaphragm chuck is a fully sealed chuck with 3-claw and 6-claw options; It is clamped based on the outer diameter P.C.D of the gear, and can process the inner diameter and end face of the gear to achieve better concentricity requirements; When processing...
-
Kf chuck is also a special chuck for shaft processing. It takes the axis as the reference, and the jaws have compensation function. It is used when concentricity is important. The compensation amount for the center jaw is 5-10MM. Because the center uses an...
-
The shaft processing chuck is available with a fixed center or an elastic center. Features of the end face drive chuck with a fixed center (equipped with a double piston cylinder):① Positioning with an axial center hole;② The fixed center can ensure the concentricity...
-
BF chuck is a back-pull flat clamping, which can be adjusted according to the thickness of the workpiece. Suitable for thin-walled workpieces that cannot be clamped due to inner and outer diameters.
-
BF chuck is a back-pull flat clamping, which can be adjusted according to the thickness of the workpiece. Suitable for thin-walled workpieces that cannot be clamped due to inner and outer diameters.
-
The inclined column back-pull chuck is available in two-jaw, three-jaw, two-jaw and three-jaw hollow types. The inclined column back-pull chuck is suitable for workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only need to replace the clamping...
-
The inclined column back-pull chuck is available in two-jaw, three-jaw, two-jaw and three-jaw hollow types. The inclined column back-pull chuck is suitable for workpieces with requirements for end face positioning, verticality and parallelism; when loading different workpieces, you only need to replace the clamping...
-
Pull the workpiece towards the baffle and clamp it at the same time, so it has the function of completely sticking the workpiece to the reference surface. It is particularly suitable for workpieces that require high verticality and concentricity processing accuracy of the reference...
Collections
Our Top Sellers
LUE built-in internal support gas and hydraulic chucks are assembled with PUE internal support chucks and LY vertical cylinders; Chucks fixed on drilling machines, milling machines or machining centers are easy to use, exquisitely designed, and simple to install; LUE built-in oblique column gas...
Inquiry
The inclined column design provides high precision and strong clamping force during processing;
Suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers;
Can use air pressure or oil pressure.
Inquiry
Vendor:
9stellar
LY Vertical Cylinder
Easy to install on fixed cylinders such as drilling machines, milling machines, tapping machines and machining centers.
Can be operated by air pressure or oil pressure.
Inquiry
There is a through hole in the center of the chuck; It is suitable for fixed pneumatic chucks such as drilling machines, milling machines, tapping machines and machining centers. Multiple chucks can be assembled on the platform to save downtime; It can use air...
Inquiry
Suitable for processing square and special-shaped objects.
Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.:
Easy to use because it uses pneumatic pressure. Small design and easy installation.
Inquiry
Fixed pneumatic chuck for drilling machines, lathes, tapping machines, machining centers, etc.:
Easy to use because it uses pneumatic pressure. Small design and easy installation.
Inquiry
Used for processing square or special-shaped workpieces;
Strong clamping force, capable of strong chip cutting;
Use connecting plate for connection.
Inquiry
It is a crank type chuck;
It has strong clamping force and can do strong cutting;
If you need to customize a chuck with different specifications and large stroke, please contact us.
Inquiry
It is a crank type chuck;
It has strong clamping force and can do strong cutting;
If you need to customize a chuck with different specifications and large stroke, please contact us.
Inquiry
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
Inquiry
The clamping force is large, and the medium and large stroke has a large clamping range. It is suitable for processing a certain workpiece and is relatively economical; When processing different workpieces, you only need to replace the clamps to use it; Repeat positioning...
Inquiry
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical;
When processing different workpieces, you only need to replace the jaws.
Inquiry
It has a large clamping force and a large clamping range, which is suitable for processing general workpieces and is relatively economical;
When processing different workpieces, you only need to replace the jaws.
Inquiry
BLT hollow two-jaw long-stroke hydraulic chuck has the same size as BL hollow three-jaw long-stroke hydraulic chuck;
BLT jaw has a larger stroke, 3 times that of the ordinary type.
Inquiry
There is a through hole in the center of the chuck, and the maximum stroke of the claw is large. The clamping range is large. It is suitable for clamping rod-type workpieces. The stroke of the BL claw is large, which is 3 times...
Inquiry
The center through hole is relatively large.
Suitable for clamping rod-type workpieces.
Inquiry
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
Inquiry
It is a center through hole chuck suitable for processing square and special-shaped long strip parts, and can replace the hard jaws.
Inquiry
It is a center through-hole chuck suitable for clamping rod-type workpieces;
Repeat positioning accuracy can reach: 0.02mm.
Inquiry
- Choosing a selection results in a full page refresh.