-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Multiple stations can be processed in one clamping. High-precision and high-quality pr oducts can be obtained, Automatic indexing can be performed when the spindle rotates, and 8X45°, 4X90° or 2X180° indexing can be performed. It provides convenience for the processing of cross shafts, valve...
-
The NHRD chuck has expanded the center positioning function based on the NHR chuck to ensure the position accuracy of the workpiece during drilling. The NHRD chuck indexing is 8×45°, 4×90°. The NHRD chuck has the same convenient jaw replacement and connection method as...
-
NHRF chuck has dual sensing signal device. NHRF chuck can be divided into 8x45° 4x90°. NHRF chuck can replace the jaws and the connection method is as convenient as NHR.
-
NHRL chuck can be indexed 2×180°. After the part is clamped once, two surfaces can be processed. NHRL chuck can be easily replaced and connected as NHR.
-
NHRP chuck is suitable for processing flat parts and long-axis workpieces. NHRP chuck is equipped with a strong or weak adjustment switch, which can adjust the clamping force according to needs. NHRP chuck has the same convenient jaw replacement and connection method as NHR....
-
NHRR chuck is based on NHR chuck, with new design and improvement. NHRR chuck solves the problem of center clamping of some parts (precision castings, pipe joints, etc.) due to certain precision requirements on the machined or unmachined surfaces. NHRR chuck has the same...
-
Vendor: 9stellarNHRS 90° Additional Angle Type Auto Indexing Chuck
● DeliverableInquiry1 variantsNHRS chuck can be divided into 4x90° and additional divisions of 3°, 4°, 5° are also available. After the parts are installed at one time, more than 4 surfaces can be processed. NHRS chuck has the same convenient jaw replacement and connection method as... -
Due to the small outer diameter of the card, it is suitable for small teaching and control lathes. There is no clamping force loss during work, and a large clamping force can be obtained with a small oil pressure. Automatic indexing can be performed...
-
One clamping can process more than 2 stations. Automatic indexing can be performed when the spindle rotates, and 6X60° or 3X120° indexing can be performed. The clamping and indexing of parts are linked by the oil piston coupling in the chuck.
-
-
-
Used for processing square or special-shaped workpieces; Strong clamping force, capable of strong chip cutting; Use connecting plate for connection.
-
Vendor: 9stellarNW-R,ER Solid Double-Piston Hydraulic Rotary Cylinder
● DeliverableInquiry4 variants
Trending Now
Popular Products
- From $31.70
- From $31.70
- Unit price
- / per
- From $18.50
- From $18.50
- Unit price
- / per
- $31.70
- $31.70
- Unit price
- / per
Collections
Sidebar
Recently Viewed Products
- Choosing a selection results in a full page refresh.