-
Vendor: SOFTOOLSide Cutter Adaptet Parts XN14/20/24/30/36 XD16/22/27/32/40 XJ10025/08022/07022/06020/04020
● DeliverableInquiry15 variants -
Vendor: SOFTOOLHSK Tool Tightening Fixture HSK-32/40/50/63/100 HG-BT30/BT40
● DeliverableInquiry7 variants
-
Vendor: SOFTOOLBT Test Bar BT40-D40-250 BT40-D40-300 BT50-D40-250 BT50-D40-300
● DeliverableInquiry4 variants
-
-
Vendor: SOFTOOLHSK-E Test Bar HSK32E-D20-180 HSK40E-D32-180 HSK50E-D32-240
● DeliverableInquiry3 variants
-
-
Vendor: SOFTOOLHSK-A Test Bar(DB) HSK32A-D24-180L-DB HSK40A-D24-180L-DB
● DeliverableInquiry5 variants
-
Vendor: SOFTOOLHSK Coolant Wrench HSK32-CPW HSK40-CPW HSK50-CPW HSK63-CPW HSK100-CPW
● DeliverableInquiry5 variants
-
Vendor: SOFTOOLHSK Coolant Pipe HSK32-CP HSK40-CP HSK50-CP HSK63-CP HSK100-CP
● DeliverableInquiry5 variants
-
Vendor: SOFTOOLHigh Precision ER Nut ER8A ER11A ER16A ER20A ER8M ER11M ER16M ER20M ER25M
● DeliverableInquiry19 variantsMounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
-
Vendor: SOFTOOLER-A Spanner / ER-M Spanner / ER-UM Spanner / Hook Head Spanner / Ball Spanner / Bolt driver / T-type key / Flag key
● DeliverableInquiry62 variants
-
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
-
Vendor: SOFTOOLJapanese Standard Pull Stud MAS 403-1975 (Coolant) BT30-45° W BT40-45° W BT50-45° W BT60-45° W BT30-60° W BT40-60° W BT50-60° W BT60-30° W BT30-90° W BT40-90° W BT50-90° W BT60-90° W
● DeliverableInquiry12 variantsFeatures: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
-
Features： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
-
Vendor: SOFTOOLGSK High Speed Collet Series GSK06 GSK10 GSK13 GSK16 GSK20 GSK25
● DeliverableInquiry6 variantsFeatures： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
-
Vendor: SOFTOOLER Coolant Collet ER11S ER16S ER20S ER25S ER32S ER40S
● DeliverableInquiry11 variantsFeatures： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
-
Vendor: SOFTOOLERG Rigid Tap Collet (ISO) ER16G ER20G ER25G ER32G ER40G
● DeliverableInquiry5 variantsFeatures： Outer diameter size according to DIN6499-B Material: SUJ2 Hardness: 44-48HRC When ordering please specify the collet type, and the size of d2. d1. W.
-
Vendor: SOFTOOLRigid Tension and Compression Taper Holder/TER-B BT30-TER20-B-100 BT30-TER32-B-100
● DeliverableInquiry2 variantsFeatures： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively...
-
Vendor: SOFTOOLOverload Prote Ction Tap Collet-GT42 System (ISO/INCH/JIS) ISO-GT42-M24 ISO-GT42-M27
● DeliverableInquiry18 variantsFeatures： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
-
Vendor: SOFTOOLOverload Prote Ction Tap Collet-GT24 System (ISO/INCH/JIS) ISO-GT24-M5 ISO-GT24-M6
● DeliverableInquiry26 variantsFeatures： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
-
Vendor: SOFTOOLOverload Prote Ction Tap Collet-GT12 System (ISO/INCH/JIS) ISO-GT12-M4 ISO-GT12-M5
● DeliverableInquiry17 variantsFeatures： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
-
Vendor: BIGtoolsK12 Rigid Tapping Collet Chuck K-System (Metric/ISO)
● DeliverableInquiry7 variants -
Vendor: BIGtoolsK3 Rigid Tapping Collet Chuck K-System (Metric/ISO)
● DeliverableInquiry9 variants
-
Vendor: BIGtoolsK3 Extended Rigid Tapping Collet Chuck K-System (Metric/ISO)
● DeliverableInquiry9 variants
-
Vendor: BIGtoolsG52 Large Specification Tapping Collet Chuck (Metric/ISO)
● DeliverableInquiry5 variants
-
-
Vendor: BIGtoolsG24 Torque Protection Tapping Collet (German Standard/DIN376)
● Deliverable
- $159.76
- $159.76
- Unit price
- per
7 variants -
Vendor: BIGtoolsG24-D48 Torque Protection Tapping Collet (Japanese Standard/JIS)
● DeliverableInquiry10 variants
-
Vendor: BIGtoolsG24-D45 Torque Protection Tapping Collet (Japanese Standard/JIS)
● DeliverableInquiry10 variants
Collections
Our Top Sellers
Mounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
Inquiry
Vendor:
SOFTOOL
Japanese Standard Pull Stud MAS 403-1975 (Coolant) BT30-45° W BT40-45° W BT50-45° W BT60-45° W BT30-60° W BT40-60° W BT50-60° W BT60-30° W BT30-90° W BT40-90° W BT50-90° W BT60-90° W
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
Inquiry
Features： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
Inquiry
Features： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
Inquiry
Features： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
Inquiry
Features：
Outer diameter size according to DIN6499-B
Material: SUJ2
Hardness: 44-48HRC
When ordering please specify the collet type, and the size of d2. d1. W.
Inquiry
Features： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively...
Inquiry
Vendor:
SOFTOOL
Overload Prote Ction Tap Collet-GT42 System (ISO/INCH/JIS) ISO-GT42-M24 ISO-GT42-M27
Features： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
Inquiry
- Choosing a selection results in a full page refresh.