-
Vendor: YGFlat Shank E9992 Series, Premium HSS-PM, 2 Flute Regular Length Ball Nose TANK-POWER End Mills 1/8～1
● DeliverableInquiry20 variants▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design... -
Vendor: YGFlat Shank GYG67 Series, PM60, 4 Flute Ball Nose ONLY ONE End Mills 1/8～1
● DeliverableInquiry9 variants
-
Vendor: YGPlain Shank E5078 Series, Carbide, 3 Flute Taper Ball Nose CARBIDE End Mills 5/32～1/4
● DeliverableInquiry100 variantsProduct Information ▶ Designed for milling die cavity. ▶ Many different center line angles are available on your job requirement.
-
Vendor: YGPlain Shank E5251 & E5252 Series, Carbide, 2&4 Flute Stub Length Double Ball Nose CARBIDE End Mills 7/32～1/2
● DeliverableInquiry60 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5062 Series, Carbide, 4 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
● DeliverableInquiry80 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5018 Series, Carbide, 2 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
● DeliverableInquiry70 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5014 & E5060 Series, Carbide, 2&4 Flute Long Length Ball Nose CARBIDE End Mills 1/8～1
● DeliverableInquiry100 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5250 Series, Carbide, 4 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
● DeliverableInquiry60 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank E5249 Series, Carbide, 2 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
● DeliverableInquiry60 variantsProduct Information ▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
-
Vendor: YGPlain Shank EI450 Series, Carbide, 2 Flute Long Reach Ball Nose D-POWER GRAPHITE End Mills 2～8
● DeliverableInquiry6 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGPlain Shank EI451 Series, Carbide, 2 Flute Long Length Ball Nose D-POWER GRAPHITE End Mills 2～12
● DeliverableInquiry8 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGPlain Shank EI880 & EI881 Series, Carbide, 2&3 Flute Short Length Ball Nose D-POWER GRAPHITE End Mills 2～12
● DeliverableInquiry20 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGPlain Shank EIB07 Series, Carbide, 4 Flute Regular Length Ball Nose with Neck D-POWER GRAPHITE End Mills 1/32～1/8
● DeliverableInquiry10 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGPlain Shank EI972 Series, Carbide, 2 Flute Long Reach Ball Nose D-POWER GRAPHITE End Mills 5/64～5/16
● DeliverableInquiry6 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGPlain Shank EI971 Series, Carbide, 2 Flute Long Length Ball Nose D-POWER GRAPHITE End Mills 5/64～1/2
● DeliverableInquiry8 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGPlain Shank EI099 & EI106 Series, Carbide, 2&4 Flute Regular Length Ball Nose D-POWER GRAPHITE End Mills 5/64～1/2
● DeliverableInquiry16 variantsProduct Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
-
Vendor: YGDlc JAI58 & Uncoated E5I58 , Carbide, 3 Flute Standard Length Ball Nose ALU-POWER HPC End Mills 1/16～1/2
● DeliverableInquiry48 variantsProduct Information ▶ Balanced cutting with less vibration ▶ Ability to run at higher speeds with less heat in aluminum ▶ More efficient chip evacuation ▶ Ability to counteract extreme radial forces ▶DLC Coating provides edge strength and unsurpassed tool life
-
Vendor: YGDlc JAI59 & Uncoated E5I59 , Carbide, 3 Flute Extented Length Ball Nose ALU-POWER HPC End Mills 3/16～1/2
● DeliverableInquiry20 variantsProduct Information ▶ Balanced cutting with less vibration ▶ Ability to run at higher speeds with less heat in aluminum ▶ More efficient chip evacuation ▶ Ability to counteract extreme radial forces ▶DLC Coating provides edge strength and unsurpassed tool life
-
Vendor: YGFlat Shank EK196 Series, HSS-PM, 3 Flute 42° Helix Roughing Ball Nose Regular Length for Aluminum ALU-POWER HPC End Mills 1/2～1/4
● DeliverableInquiry10 variantsProduct Information ▶ High performance metal removal in aluminum alloys.
-
Vendor: YGPlain Shank EG908 Series, Carbide, 3 Flute 40° Helix Long Length Ball Nose with Neck ALU-POWER HPC End Mills 2～16
● DeliverableInquiry11 variantsProduct Information ▶ Excellent cutting qualities on stainless steel, Aluminum, copper. ▶ Increased tool life and higher cutting accuracy. ▶ Mirror face-excellent surface finish.
-
Vendor: YGPlain Shank EG910 Series , Carbide, 2 Flute 50° Helix Stub Cut Length Ball Nose with Neck ALU-POWER HPC End Mills 6～20
● DeliverableInquiry6 variantsProduct Information ▶ Excellent cutting qualities on stainless steel, Aluminum, copper. ▶ Increased tool life and higher cutting accuracy. ▶ Mirror face-excellent surface finish.
-
Vendor: YGPlain Shank E5975 Series , Carbide, 3 Flute 40° Helix Long Length Ball Nose with Neck ALU-POWER HPC End Mills 3/32～5/8
● DeliverableInquiry16 variantsProduct Information ▶ Excellent cutting qualities on stainless steel, aluminum, copper. ▶ Increased tool life and higher cutting accuracy. ▶ Mirror face-excellent surface finish.
-
Vendor: YGPlain Shank E5978 Series , Carbide, 2 Flute 37° Helix Long Reach Ball Nose ALU-POWER HPC End Mills 1/4～1
● DeliverableInquiry28 variantsProduct Information ▶ High velocity milling of aluminum & other non-ferrous materials. ▶ Extended neck design which is suitable for step milling. ▶ Improved surface roughness-cylinderical margin which is controlled tightly ▶ Maximum-metal removal rate. ▶ Superior chip evacuation. ▶ Mirror face-excellent surface finish.
-
Vendor: YGPlain Shank E5974 Series , Carbide, 2 Flute 50° Helix Stub Cut Length Ball Nose with Neck ALU-POWER HPC End Mills 1/4～3/4
● DeliverableInquiry12 variantsProduct Information ▶ Excellent cutting qualities on stainless steel, aluminum, copper. ▶ Increased tool life and higher cutting accuracy. ▶ Mirror face-excellent surface finish.
-
Vendor: YGPlain Shank E5E45 Series , Carbide, 3 Flute Roughing Ball Nose ALU-POWER HPC End Mills 1/4～1
● DeliverableInquiry6 variantsProduct Information ▶ Excellent cutting qualities on aluminum, copper. ▶ Increased tool life and superior chip evacuation. ▶ Reduces chipping of corner edges.
-
Vendor: YGPlain Shank EMB74 /Flat Shank EMB75, Carbide, 4 Flute Regular Length Ball Nose V7 MILL INOX End mills
● DeliverableInquiry20 variantsProduct Information ▶Special flute geometry eliminates vibrations ▶Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, prehardened steels and low hardness material ▶Excellent work piece finishes ▶Higher speeds, deeper cuts and metal removal rates
-
Vendor: YGPlain Shank EMB78 /Flat Shank EMB79 , Carbide, 4 Flute Regular Length Ball Nose V7 MILL INOX End mills
● DeliverableInquiry10 variantsProduct Information ▶Special flute geometry eliminates vibrations ▶Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, prehardened steels and low hardness material ▶Excellent work piece finishes ▶Higher speeds, deeper cuts and metal removal rates
-
Vendor: YGChamfer GMF53 / GMF57 , Corner Radius GMF55 / GMF59, Ball Nose GMG56 Carbide, 4 Flute Multiple Length V7 PLUS A END MILLS
● DeliverableInquiry82 variantsProduct Information ▶ Special flute geometry and multiple helix eliminate vibrations ▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40 ▶ Advanced coating for superior performance and tool life
-
Vendor: YGChamfer GMF52 / GMF56 , Corner Radius GMF54 / GMF58, Ball Nose GMG55 Carbide, 4 Flute Multiple Length V7 PLUS A END MILLS
● DeliverableInquiry82 variantsProduct Information ▶ Special flute geometry and multiple helix eliminate vibrations ▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40 ▶ Advanced coating for superior performance and tool life
-
Vendor: YGSquare UGMF73, Corner Radius UGMF75, Carbide, 4 Flute Extended Reach V7 PLUS A END MILLS
● DeliverableInquiry44 variantsProduct Information ▶ Special flute geometry and multiple helix eliminate vibrations ▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40 ▶ Advanced coating for superior performance and tool life
Collections
Our Top Sellers
Vendor:
BIGtools
G-SM200-IM2/IM3 Solid Carbide Endmills MILLING TOOLS 2/3 Flutes, Ballnose, with Long Neck Interchangeable equipment：450i，540i，DMG
- From $64.40
- From $64.40
- Unit price
- per
- From $21.20
- From $21.20
- Unit price
- per
- From $13.70
- From $13.70
- Unit price
- per
- From $16.70
- From $16.70
- Unit price
- per
Vendor:
WIDIA
Versatile Solid Carbide End Mills •WCE4 • Series W41B • Ball Nose • 4 Flute • Weldon® Shank • Inch
The WCE solid end milling line features an advanced geometry to enable material versatility for end users seeking a cost-effective solution while machining small batches. WCE4, 4-fl ute geometry combines the asymmetrical index and variable helix features at an affordable price while ensuring material and application versatility, including...
- $73.22
- $73.22
- Unit price
- per
Vendor:
WIDIA
General-Purpose Solid Carbide End Mills GP End Mills • Series 2848 • Ball Nose • 4 Flute • Metric DIN 6528 (UNCOATED)
The GP solid end milling line is a group of highly versatile end mills created for small shop customers to manage inventory effectively by reducing the initial tooling investment and increasing the value to recondition. The GP end mills perform plunging, slotting, and profi...
- $32.78
- $32.78
- Unit price
- per
Vendor:
WIDIA
Solid Carbide End Mills • VariMill I • Series 47N0 • Ball Nose • Neck • 4 Flute • Metric WP15PE
The VariMill I end mill family is for CNC machine shops looking for an all-around tool with a wide standard product range capable of machining multiple materials, covering confi gurations from a long length-of-cut through a ball nose profi le for 3D machining applications....
- From $67.50
- From $67.50
- Unit price
- per
- Choosing a selection results in a full page refresh.