-
Vendor: YG8% COBALT (M42) Flat Shank E2086 Series, HSS Co8, Multi Flute Stub Length Fine Pitch Roughing Center Cutting COBALT & HSS End Mills 1/4~1
● DeliverableInquiry8 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very broad spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are... -
Vendor: YG8% COBALT (M42) Flat Shank E2100 & HSS (M2) Flat Shank E1100 Series, HSS Co8 & HSS, 6 Flute Regular with Combination Center Cutting (2 Shank) COBALT & HSS End Mills 2
● DeliverableInquiry10 variantsProduct Information ▶ These are to be used for heavy hogging cuts in die-sinking, tape & tracer controlled milling and similar work. The Heavy-Duty end mills are made with toughened Combination shank, heavy web construction, accurate machine-ground end-teeth notching and a special surface treatment to reduce...
-
Vendor: YG8% COBALT (M42) Flat Shank E2110 & HSS (M2) Flat Shank E1110 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
● DeliverableInquiry50 variantsProduct Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two...
-
Vendor: YG8% COBALT (M42) Flat Shank E2111 & HSS (M2) Flat Shank E1111 Series, HSS Co8 & HSS, 2 Flute Extended Length Ball Nose COBALT & HSS End Mills 1/8～1
● DeliverableInquiry20 variantsProduct Information ▶ Longer flute length than E2110 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
-
Vendor: YG8% COBALT (M42) Flat Shank E2112 & HSS (M2) Flat Shank E1112 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
● DeliverableInquiry20 variantsProduct Information ▶ Same construction features as E2110 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
-
Vendor: YG8% COBALT (M42) Flat Shank E2120 & HSS (M2) Flat Shank E2121 Series, HSS Co8, 3&4 Flute 60° Helix Regular Length COBALT & HSS End Mills 1/4~2
● DeliverableInquiry12 variantsProduct Information ▶ Provided with high helix angle(60°). ▶ Smooth cutting and small cutting resistance. ▶ Suitable for machining of difficult-to-cut materials.
-
Vendor: YG8% COBALT (M42) Flat Shank E2160 & HSS (M2) Flat Shank E2161 Series, HSS Co8, 3 Flute Short & Long Length Throw Away COBALT & HSS End Mills 1/16~1/4
● DeliverableInquiry14 variantsProduct Information ▶ Well balanced web design to minimize deflection & chattering. High accuracy for O.D. is guaranteed under the strict tolerance control. Much higher(50%) table speed than 2 Flute is allowed.
-
Vendor: YG8% COBALT (M42) Flat Shank E2163 & HSS (M2) Flat Shank E1163 Series, HSS Co8 & HSS, 2 Flute 15° Helix for Keyway Cutting COBALT & HSS End Mills 1/8~1
● DeliverableInquiry22 variantsProduct Information ▶ E2163(E1163) are keyway cutting end mills that have the same design as the general purpose of two flute single end mill, but are held to a mill diameter tolerance of +.0000 -.0015. These close tolerance end mills are recommended for cutting keyway...
-
Vendor: YG8% COBALT (M42) Flat Shank E2170 Series, HSS Co8, Multi Flute Regular Length Coarse Pitch Roughing COBALT & HSS End Mills 1/4~1
● DeliverableInquiry30 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.The end tooth of this tool has a center hole design for many...
-
Vendor: YG8% COBALT (M42) Flat Shank E2171 Series, HSS Co8, Multi Flute Medium Length Coarse Pitch Roughing COBALT & HSS End Mills 1~2
● DeliverableInquiry4 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials. The end tooth of this tool has a center hole design for...
-
Vendor: YG8% COBALT (M42) Flat Shank E2172 Series, HSS Co8, Multi Flute Long Length Coarse Pitch Roughing COBALT & HSS End Mills 1/2~2
● DeliverableInquiry14 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials. The end tooth of this tool has a center hole design for...
-
Vendor: YG8% COBALT (M42) Flat Shank E2191 Series, HSS Co8, 3 Flute 37° Helix Regular Length Roughing for Aluminum COBALT & HSS End Mills 1/4~1
● DeliverableInquiry10 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very broad spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are...
-
Vendor: YG8% COBALT (M42) Flat Shank E2193 & E2125 Series, HSS Co8, Multi Flute Regular & Long Length Coarse Pitch Roughing Ball Nose COBALT & HSS End Mills 1/4~1
● DeliverableInquiry18 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
-
Vendor: YG8% COBALT (M42) Flat Shank E2195 & E2197 Series, HSS Co8, Multi Flute Regular & Long Length Coarse Pitch Roughing Center Cutting COBALT & HSS End Mills 1/2~1
● DeliverableInquiry12 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
-
Vendor: YG8% COBALT (M42) Flat Shank E2226 & E2192 Series, HSS Co8, 3 Flute 37° Helix Medium & Long Length Roughing for Aluminum COBALT & HSS End Mills 1/4~1
● DeliverableInquiry8 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting aluminum, aluminum alloy and many non-ferrous materials.
-
Vendor: YG8% COBALT (M42) Flat Shank E2237 & HSS (M2) Flat Shank E1237 Series, HSS Co8 & HSS, 4 Flute Corner Rounding COBALT & HSS End Mills 1/16~1
● DeliverableInquiry64 variantsProduct Information ▶ This general corner rounding end mills are designed for machining fillets on work piece.
-
Vendor: YG8% COBALT (M42) Flat Shank E2241 Series, HSS Co8, 3flute Stub Length Coarse Pitch Roughing Center Cutting COBALT & HSS End Mills 1/4~1
● DeliverableInquiry6 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials. The end tooth of this tool has a center hole design for...
-
Vendor: YG8% COBALT (M42) Flat Shank E2248 Series, HSS Co8, Multi Flute Regular Length Roughing & Finishing COBALT & HSS End Mills 1/4~2
● DeliverableInquiry27 variantsProduct Information ▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very broad spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are...
-
Vendor: YG8% COBALT (M42) Flat Shank E2482 & HSS (M2) Flat Shank E1482 Series, HSS Co8 & HSS, 2 Flute Regular Length COBALT & HSS End Mills 2.0～45.0
● DeliverableInquiry56 variantsProduct Information ▶ Two flute end mills with metric cutting diameter are especially recommended for slotting operation, pocketing keyway cutting and other general purpose work including plunge cutting.
-
Vendor: YG8% COBALT (M42) Flat Shank E2483 & HSS (M2) Flat Shank E1483 Series, HSS Co8 & HSS, 4 Flute Regular Length COBALT & HSS End Mills 2.0～45.0
● DeliverableInquiry56 variantsProduct Information ▶ E2483 have an extensive range of standard regular length in metric diameter. ▶ End mills with center cutting are recommended for a wide range of cutting jobs, including slotting, shallow pocketing and tracer milling.
-
Vendor: YG8% COBALT (M42) Plain Shank E2001 & HSS (M2) Plain Shank E1001 Series, HSS Co8 & HSS, 2 Flute Miniature Stub Length Double COBALT & HSS End Mills 1/32~3/16
● DeliverableInquiry22 variantsProduct Information ▶ Tools under Miniature end mills have 3/16″ shank diameter without flats. They are designed with positive rake angle geometry and a high helix angle to insure free cutting action. The flute design provides good strength behind the cutting edge. Suitable for finishing...
-
Vendor: YG8% COBALT (M42) Plain Shank E2002 & HSS (M2) Plain Shank E1002 Series, HSS Co8 & HSS, 4flute Miniature Stub Length Double COBALT & HSS End Mills 1/16~3/16
● DeliverableInquiry18 variantsProduct Information ▶ Suitable for finishing of precision components such as watch, camera electronic apparatus molds, etc.
-
Vendor: YG8% COBALT (M42) Plain Shank E2003 & HSS (M2) Plain Shank E1003 Series, HSS Co8 & HSS, 2 Flute Miniature Regular Length Double COBALT & HSS End Mills 1/32~3/16
● DeliverableInquiry22 variantsProduct Information ▶ Suitable for finishing of precision components such as watch, camera electronic apparatus molds, etc.
-
Vendor: YG8% COBALT (M42) Plain Shank E2004 & HSS (M2) Plain Shank E1004 Series, HSS Co8 & HSS, 4flute Miniature Regular Length Double COBALT & HSS End Mills 1/16~3/16
● DeliverableInquiry18 variantsProduct Information ▶ Suitable for finishing of precision components such as watch, camera electronic apparatus molds, etc.
-
Vendor: YG8% COBALT (M42) Plain Shank E2005 & HSS (M2) Plain Shank E1005 Series, HSS Co8 & HSS, 2 Flute Miniature Long Length Double COBALT & HSS End Mills 1/32~3/16
● DeliverableInquiry18 variantsProduct Information ▶ Suitable for finishing of precision components such as watch, camera electronic apparatus molds, etc.
-
Vendor: YG8% COBALT (M42) Plain Shank E2006 & HSS (M2) Plain Shank E1006 Series, HSS Co8 & HSS, 4flute Miniature Long Length Double COBALT & HSS End Mills 1/16~3/16
● DeliverableInquiry18 variantsProduct Information ▶ Suitable for finishing of precision components such as watch, camera electronic apparatus molds, etc.
-
Vendor: YG8% COBALT (M42) Plain Shank E2008 & HSS (M2) Plain Shank E1008 Series, HSS Co8 & HSS, 2 Flute Miniature Stub Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
● DeliverableInquiry10 variantsProduct Information ▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
-
Vendor: YG8% COBALT (M42) Plain Shank E2013 & HSS (M2) Plain Shank E1013 Series, HSS Co8 & HSS, 2 Flute Miniature Regular Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
● DeliverableInquiry22 variantsProduct Information ▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
-
Vendor: YG8% COBALT (M42) Plain Shank E2015 & HSS (M2) Plain Shank E1015 Series, HSS Co8 & HSS, 2 Flute Miniature Long Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
● DeliverableInquiry10 variantsProduct Information ▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
-
Vendor: TaeguTec8D-TE90-07 90° End mills with 8 cutting edges of double-sided Square inserts SQ 07 for general milling
● DeliverableInquiry17 variantsProduct List 90° Shoulder Mill with8 Cutting Edge Square Insert » Economical double-sided insert» Strong tool body and high positive insert» High productivity with maximum No. of teeth» 90° shouldering with wiper flat insert» Good chip evacuation Designation DC CICT DCONMS OAL LH APMX...
Related categories
3 Flute Carbide Drills
BIG DAISHOWA
Carbide Drill Bits
Coolant
Damping Tools
Deburring Tools
Digimatic
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
External Coolant
Extrnal
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Insert
Internal
Internal Coolant
ISCAR
Large Diameter Boring
Mega Chuck
Micro Deep End Mills
Modular Drill
PB Swiss Tools
PCD Drill
PCD End Mills
Rough Boring
Roughing End Mills
Ruby
Shallow Hole Drill
Small Parts Machining
Solid End Mills for Dental
Swiss Type Lathe
TaeguTec
Tungsten carbide
Without Coolant
ZCCT