-
Vendor: TaeguTecTERNS-10/12/16 End mills with double-sided round inserts of RNMU for general and Die & Mold application
● DeliverableInquiry31 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation DCX DC... -
Vendor: SOFTOOLด้ามจับกลึง PSC DCLNR/L Kr95° ด้าม Coromant Capto เม็ดมีด: CNMM CNMG CNMA CNGA
● Deliverable- From $362.83
- From $362.83
- Unit price
- per
4 variants -
Vendor: SOFTOOLด้ามจับกลึง PSC DCLNR/L Kr95° ด้าม Coromant Capto เม็ดมีด: CNMM CNMG CNMA CNGA
● Deliverable
- From $233.23
- From $233.23
- Unit price
- per
16 variants -
Vendor: SOFTOOLด้ามจับกลึง PSC DCLNR/L Kr95° ด้าม Coromant Capto เม็ดมีด: CNMM CNMG CNMA CNGA
● Deliverable
- From $362.83
- From $362.83
- Unit price
- per
5 variants -
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $1,065.08
- From $1,065.08
- Unit price
- per
3 variants -
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $2,086.85
- From $2,086.85
- Unit price
- per
6 variants -
Vendor: TaeguTecTERNS-M-10/12/16 Modular end mills with T-FLEXTEC adaptation and double-sided round inserts of RUMU for general profiling and Die & Mold industry
● DeliverableInquiry13 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation DCX DC...
-
Vendor: TaeguTec7S-E45-06 45° End mills with positive 7 cutting edged inserts & less cutting forces for small machines
● DeliverableInquiry3 variantsProduct List Single-Sided 7 Cutting Edge Insert for 45° Face Milling » Economical single-sided 7 cutting edge insert for face milling» Smooth machining with high positive helical cutting edge» Good surface finish with wide wiper flat design» No interference during side wall and helical...
-
Vendor: TaeguTecTCF-11 Chamfering end mills with SPMT/SPMG 11 milling inserts on 15, 30 & 45 degrees chamfering
● DeliverableInquiry5 variantsProduct List Designation DC DCONMS CICT KAPR DCX APMX Fig. Weight/kg MIID TCF45 D07-11 7.00 20.00 1 45.0 21.50 7.20 2 0.27 SPMT 110408-EM TCF45 D19-11 19.00 20.00 2 45.0 33.40 7.20 1 0.30 SPMT 110408-EM TCF15 D25-11 25.00 20.00 2 75.0 30.50 10.10...
-
Vendor: TaeguTecTDM-09/11/14 Drilling & milling end mills with SPMT and SPMG 09/11/14 milling inserts
● DeliverableInquiry6 variantsProduct List Designation DC CICT LU DCONMS OAL APMX Cd Weight/kg MIID TDM 225 W25-09 25.00 2 50.00 25.00 110.00 9.00 30.00 0.34 SPMG 090408-EM TDM 228 W32-09 28.00 2 60.00 32.00 125.00 9.00 38.00 0.56 SPMG 090408-EM TDM 232 W32-11 32.00 2 60.00...
-
Vendor: TaeguTecTDM-06 Drilling & milling end mills with XOMT 06 inserts
● DeliverableInquiry5 variantsProduct List Designation DC CICT LH DCONMS OAL APMX Cd Weight/kg MIID TDM 112 W16-06 12.00 1 20.00 16.00 80.00 5.60 12.00 0.09 XOMT 060204 TDM 216 W20-06 16.00 2 25.00 20.00 90.00 5.60 16.00 0.17 XOMT 060204 TDM 218 W20-06 18.00 2 25.00...
-
Vendor: TaeguTecTSF-09/11/14 Spot facing end mills with SPMT and SPMG 09/11/14 milling inserts
● DeliverableInquiry6 variantsProduct List Designation DC CICT LH DCONMS OAL APMX Weight/kg MIID TSF 222-W25-09 22.00 2 40.00 25.00 100.00 9.00 0.29 SPMT 090408-EM TSF 225-W25-09 25.00 2 40.00 25.00 100.00 9.00 0.56 SPMT 090408-EM TSF 332-W32-11 32.00 3 55.00 32.00 115.00 10.70 1.31 SPMT 110408-EM...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $892.15
- From $892.15
- Unit price
- per
7 variants -
Product List Designation DC CICT LH DCONMS OAL Cd APMX Weight/kg MIID TSF 112-W16-06 12.00 1 27.00 16.00 80.00 18.00 5.60 0.10 XOMT 060204 TSF 216-W20-06 16.00 2 27.00 20.00 90.00 18.00 5.60 0.18 XOMT 060204 TSF 320-W20-06 20.00 3 25.00 20.00 100.00 18.00...
-
Vendor: TaeguTec3P-TCF 45-S-04 Modular head for 45° chamfering with MAXIRUSH adaptation & 3 no. of 3PK(H)T 04 inserts
● DeliverableInquiry1 variantsProduct List True 90° Shoulder Milling Solutionswith High Positive 3 Cutting Edges » Super high positive helical cutting edge insert» True 90° shoulder milling with very smooth and soft machining» High productivity with maximum No. of teeth» Strong tool body with larger core size»...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $1,438.97
- From $1,438.97
- Unit price
- per
4 variants -
Vendor: TaeguTec3P-TCF 45-10 Small diameter 45° chamfering end mills with 1 no. of 3PK(H)T 10 insert
● DeliverableInquiry1 variantsProduct List True 90° Shoulder Milling Solutionswith High Positive 3 Cutting Edges » Super high positive helical cutting edge insert» True 90° shoulder milling with very smooth and soft machining» High productivity with maximum No. of teeth» Strong tool body with larger core size»...
-
Vendor: TaeguTec3P-TCF 30/45/60-06/10 30°, 45° & 60° Chamfering end mills with 3 no. of 3PK(H)T 06/10 inserts
● DeliverableInquiry4 variantsProduct List True 90° Shoulder Milling Solutionswith High Positive 3 Cutting Edges » Super high positive helical cutting edge insert» True 90° shoulder milling with very smooth and soft machining» High productivity with maximum No. of teeth» Strong tool body with larger core size»...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $1,102.75
- From $1,102.75
- Unit price
- per
8 variants -
Vendor: TaeguTecTE90XEV-HSK63A-16 90° End mills with HSK 63A shank & very high positive rake angle & two helical cutting edges of XEVT 16 for high speed machining of aluminum
● DeliverableInquiry6 variantsProduct List High Speed Machining of Aluminum Alloys and Non-ferrous Materials » Ultra high-speed machining of aluminum alloys and non-ferrous materials» Various applications: shouldering, step-down milling, straight & helical ramping and slotting» Soft machining and excellent surface finish with a high positive cutting edge...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $943.07
- From $943.07
- Unit price
- per
18 variants -
Vendor: TaeguTecTE90XEV-16/22 90° End mills with XEVT 16/22 inserts of very high positive rake angle & helical cutting edges for high speed aluminum machining
● DeliverableInquiry10 variantsProduct List High Speed Machining of Aluminum Alloys and Non-ferrous Materials » Ultra high-speed machining of aluminum alloys and non-ferrous materials» Various applications: shouldering, step-down milling, straight & helical ramping and slotting» Soft machining and excellent surface finish with a high positive cutting edge...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $60.43
- From $60.43
- Unit price
- per
19 variants -
Vendor: TaeguTecTE90XEV-M-16 90° Modular end mills with T-FLEXTEC adaptation & high positive 2 helical cutting edges of V bottomed XEVT inserts for high speed aluminum machining
● DeliverableInquiry4 variantsProduct List High Speed Machining of Aluminum Alloys and Non-ferrous Materials » Ultra high-speed machining of aluminum alloys and non-ferrous materials» Various applications: shouldering, step-down milling, straight & helical ramping and slotting» Soft machining and excellent surface finish with a high positive cutting edge...
-
Vendor: TaeguTec8D-TE90-M-07 Modular 90° end mills with T-FLEXTEC adaptation & double sided square inserts SQ 07 of 8 cutting edges
● DeliverableInquiry5 variantsProduct List 90° Shoulder Mill with8 Cutting Edge Square Insert » Economical double-sided insert» Strong tool body and high positive insert» High productivity with maximum No. of teeth» 90° shouldering with wiper flat insert» Good chip evacuation Designation DC CICT DCONMS LF OAL THSZMS...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● Deliverable
- From $70.46
- From $70.46
- Unit price
- per
10 variants -
Vendor: TaeguTec8D-TE90-12 90° End mills with 8 cutting edges of double-sided Square inserts SQK(H)U 12 for general milling
● DeliverableInquiry2 variantsProduct List 90° Shoulder Mill with8 Cutting Edge Square Insert » Economical double-sided insert» Strong tool body and high positive insert» High productivity with maximum No. of teeth» 90° shouldering with wiper flat insert» Good chip evacuation Designation DC CICT DCONMS OAL LH APMX...
-
Vendor: TaeguTec8D-TE90-07 90° End mills with 8 cutting edges of double-sided Square inserts SQ 07 for general milling
● DeliverableInquiry17 variantsProduct List 90° Shoulder Mill with8 Cutting Edge Square Insert » Economical double-sided insert» Strong tool body and high positive insert» High productivity with maximum No. of teeth» 90° shouldering with wiper flat insert» Good chip evacuation Designation DC CICT DCONMS OAL LH APMX...
-
Vendor: SOFTOOLซีรีย์ BFA-T แบบเจาะละเอียด BFA-020025-TB06-S-CKB1 BFA-100160-TC11-S-CKB7
● DeliverableInquiry2 variants
-
Vendor: TaeguTec8D-TE90-M-10 Modular 90° end mills with T-FLEXTEC adaptation & double sided square inserts SQK(H)U 10 of 8 cutting edges
● DeliverableInquiry3 variantsProduct List 90° Shoulder Mill with8 Cutting Edge Square Insert » Economical double-sided insert» Strong tool body and high positive insert» High productivity with maximum No. of teeth» 90° shouldering with wiper flat insert» Good chip evacuation Designation DC CICT DCONMS LF OAL THSZMS...
Collections
All Indexable Tools
Indexable Cutting Tools - Indexable Inserts
Discover high-performance indexable cutting tools with replaceable inserts for precise,
cost-effective metalworking. Perfect for milling, turning, and drilling across materials like steel,
aluminum, and titanium. Durable and efficient for CNC and manual machining in automotive,
aerospace, and manufacturing industries.
cost-effective metalworking. Perfect for milling, turning, and drilling across materials like steel,
aluminum, and titanium. Durable and efficient for CNC and manual machining in automotive,
aerospace, and manufacturing industries.
สินค้าขายดีของเรา
Vendor:
YG
8% COBALT (M42) Flat Shank E2193 & E2125 Series, HSS Co8, Multi Flute Regular & Long Length Coarse Pitch Roughing Ball Nose COBALT & HSS End Mills 1/4~1
Product Information
▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2015 & HSS (M2) Plain Shank E1015 Series, HSS Co8 & HSS, 2 Flute Miniature Long Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2013 & HSS (M2) Plain Shank E1013 Series, HSS Co8 & HSS, 2 Flute Miniature Regular Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2008 & HSS (M2) Plain Shank E1008 Series, HSS Co8 & HSS, 2 Flute Miniature Stub Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2069 Series, HSS Co8, 4 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
Product Information
▶ Same construction features as E2020 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2021 Series, HSS Co8, 4 Flute Long Length Ball Nose COBALT & HSS End Mills 1/4～1
Product Information
▶ Longer flute length than E2020 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2020 Series, HSS Co8, 4 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
Product Information
▶ The four flute ball end mills are designed for milling of radius bottom slots fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2112 & HSS (M2) Flat Shank E1112 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
Product Information
▶ Same construction features as E2110 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2111 & HSS (M2) Flat Shank E1111 Series, HSS Co8 & HSS, 2 Flute Extended Length Ball Nose COBALT & HSS End Mills 1/8～1
Product Information
▶ Longer flute length than E2110 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2110 & HSS (M2) Flat Shank E1110 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
Product Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two...
Inquiry
Vendor:
YG
Flat Shank E9992 Series, Premium HSS-PM, 2 Flute Regular Length Ball Nose TANK-POWER End Mills 1/8～1
Product Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute...
Inquiry
Product Information
Inquiry
Product Information
▶ Designed for milling die cavity.
▶ Many different center line angles are available on your job requirement.
Inquiry
Vendor:
YG
Plain Shank E5251 & E5252 Series, Carbide, 2&4 Flute Stub Length Double Ball Nose CARBIDE End Mills 7/32～1/2
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5062 Series, Carbide, 4 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5018 Series, Carbide, 2 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5014 & E5060 Series, Carbide, 2&4 Flute Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5250 Series, Carbide, 4 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5249 Series, Carbide, 2 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank EI450 Series, Carbide, 2 Flute Long Reach Ball Nose D-POWER GRAPHITE End Mills 2～8
Product Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
Inquiry
- Choosing a selection results in a full page refresh.