-
Vendor: SOFTOOLHSK100A-ER Collet Chuck HSK100A-ER16-100 HSK100A-ER16-125
● DeliverableInquiry35 variantsFeatures: Nut for pre-set dynamic balance nut. The whole through hole is favorable for water and shock resistance. When installed, the collet must be loaded into the nut, and then into the tool, and then into the body and lock. The tool into the... -
Vendor: SOFTOOLHSK100A-SLN Side Lock End Mill Holder HSK100A-SLN16-100 HSK100A-SLN16-160
● DeliverableInquiry18 variantsFeatures: Internal hole tolerance: H5
-
Vendor: SOFTOOLHSK63A-C Force Milling Chuck HSK63A-C20-100 HSK63A-C25-100
● DeliverableInquiry6 variantsFeatures: Slitting. In that case end mill shank or collet have oil or chips, divide the slitting into six in order to prevent slipping and to grip exactly. Needle bearing. It adopts two line arrangement in order to minimize rolling friction and to slip...
-
Vendor: SOFTOOLHSK63A-ER Collet Chuck HSK63A-ER16-075 HSK63A-ER16-100
● DeliverableInquiry30 variantsFeatures: Nut for pre-set dynamic balance nut. The whole through hole is favorable for water and shock resistance. When installed, the collet must be loaded into the nut, and then into the tool, and then into the body and lock. The tool into the...
-
Vendor: SOFTOOLHSK63A-GER Collet Chuck HSK63A-GER16-70 HSK63A-GER16-100
● DeliverableInquiry15 variants
-
Vendor: SOFTOOLHSK63A-GSK Collet Chuck HSK63A-GSK10-70 HSK63A-GSK10-100
● DeliverableInquiry11 variants
-
Vendor: SOFTOOLHSK63A-SLN Side Lock End Mill Holder HSK63A-SLN8-100 HSK63A-SLN10-100
● DeliverableInquiry22 variantsFeatures: Internal hole tolerance: H5
-
Vendor: SOFTOOLHydraulic Actuated Receiver PSC50 PSC40 PSC63 PSC80 PSC80X
● Deliverable
- From $1,999.00
- From $1,999.00
- Unit price
- per
5 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely. -
Vendor: SOFTOOLHydraulic Actuated Receiver-Low-Pressure Cooling PSC63 PSC80
● DeliverableInquiry2 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely.
-
KEY ADVANTAGES Mandrels can be used on machine center Ms dock rotating for lathes without clamping cylinde Manual/hydraulic mandrel actuation Ideal for 5-sided machining Clamping range ∅8-200mm
-
Vendor: SOFTOOLInternal Turning Tool Body HSK-T DCLNR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
6 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T DDUNR/L-Kr 93°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
10 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T DWLNR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
4 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T PCLNR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
26 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T PSKNR/L-Kr 75°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
5 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T SCLCR/L-Kr 95°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
42 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T SDUCR/L-Kr 93°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
40 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T STFCR/L-Kr 91°
● Deliverable
- From $250.12
- From $250.12
- Unit price
- per
8 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLInternal Turning Tool Body HSK-T SVQBR/L-Kr 107.5°
● Deliverable
- From $303.53
- From $303.53
- Unit price
- per
18 variantsFeatures： For turning the Internal of the workpiece. Out-machine tool adjustment, can be used in automatic mechanical equipment. Match the ISO standard insert on the market Support non-standard customization. -
Vendor: SOFTOOLISL 12-IC lnternal cooling ISL01200030MIC-AA/AAA
● Deliverable
- From $52.00
- From $52.00
- Unit price
- per
12 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 12-PC End-face cooling ISL01200030MPC-AA/AAA ISL01200080MPC-AA/AAA
● Deliverable
- From $76.00
- From $76.00
- Unit price
- per
10 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 20-IC lnternal cooling ISL02000030MIC-AA/AAA ISL02000160MIC-AA/AAA
● Deliverable
- From $52.00
- From $52.00
- Unit price
- per
28 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 20-PC End-face cooling ISL02000030MPC-AA/AAA ISL02000160MPC-AA/AAA
● Deliverable
- From $76.00
- From $76.00
- Unit price
- per
28 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 25-IC lnternal cooling ISL02500060MIC-AA/AAA ISL02500200MIC-AA/AAA
● Deliverable
- From $60.00
- From $60.00
- Unit price
- per
16 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 32-IC lnternal cooling ISL03200060MIC-AA/AAA ISL03200250MIC-AA/AAA
● Deliverable
- From $60.00
- From $60.00
- Unit price
- per
18 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
Vendor: SOFTOOLISL 32-PC End-face cooling ISL03200060MPC-AA/AAA ISL03200250MPC-AA/AAA
● Deliverable
- From $76.00
- From $76.00
- Unit price
- per
18 variantsFeature: Used with hydraulic chuck to realize flexible clamping range. -
-
-
Vendor: SOFTOOLJapanese Standard Pull Stud MAS 403-1975 (Coolant) BT30-45° W BT40-45° W BT50-45° W BT60-45° W BT30-60° W BT40-60° W BT50-60° W BT60-30° W BT30-90° W BT40-90° W BT50-90° W BT60-90° W
● DeliverableInquiry12 variantsFeatures: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
Trending Now
Popular Products
- From $31.70
- From $31.70
- Unit price
- / per
- From $20.02
- From $20.02
- Unit price
- / per
- $31.70
- $31.70
- Unit price
- / per
Collections
Sidebar
Recently Viewed Products
- Choosing a selection results in a full page refresh.