-
Vendor: BIGtoolsG-UP210-S2 2 Flute Square Head Coated Endmills
● Deliverable- From $14.04
- From $14.04
- Unit price
- per
35 variantsSuitable for steels & cast iron(≤48HRC). High performance AlCr series coating, high temperatureresistance and high wear resistance. Adapt to several kings of cooling conditions, for example oilmist, water, oil,air cooling. -
Vendor: BIGtoolsG-UP210-SS2 2 Flute Square Head Short Edge Coated Endmills
● Deliverable
- From $12.48
- From $12.48
- Unit price
- per
16 variantsSuitable for steels & cast iron(≤48HRC). High performance AlCr series coating, high temperatureresistance and high wear resistance. Adapt to several kings of cooling conditions, for example oilmist, water, oil,air cooling. -
Vendor: BIGtoolsG-UP210 2 Flutes Long Flute Length Square Endmills for General Machining of Steel
● Deliverable
- From $22.18
- From $22.18
- Unit price
- per
13 variants● Suitable for steels﹠cast iron(≤48HRC). ● High performance AlCr series coating with high temperature resistance and high wear resistance. ● Adapt to oil mist, water, oil, air cooling and other cooling conditions. -
Vendor: BIGtoolsG-UP210 2 Flutes Standard Length Square Endmills for General Machining of Steel
● Deliverable
- From $11.86
- From $11.86
- Unit price
- per
35 variants● Suitable for steels﹠cast iron(≤48HRC). ● High performance AlCr series coating with high temperature resistance and high wear resistance. ● Adapt to oil mist, water, oil, air cooling and other cooling conditions. -
Vendor: BIGtoolsG-UP210 2 Flutes, Stub Length, Square Endmills for General Machining of Steel
● Deliverable
- From $11.70
- From $11.70
- Unit price
- per
16 variants● Suitable for steels﹠cast iron(≤48HRC). ● High performance AlCr series coating with high temperature resistance and high wear resistance. ● Adapt to oil mist, water, oil, air cooling and other cooling conditions. -
Vendor: ZCC.CTSolid carbide milling End mill long cutting edge High-performance machining EPM-2EL-W
● DeliverableInquiry11 variants -
Vendor: ZCC.CTSolid carbide milling Square shoulder mill Hard machining HMX-4E
● DeliverableInquiry5 variants
-
Vendor: ZCC.CTSolid carbide milling Square shoulder mill High-performance machining VPM-4E
● DeliverableInquiry4 variants
-
Vendor: ZCC.CTSolid carbide milling Square shoulder mill High-performance machining PM-4E
● DeliverableInquiry5 variants
-
Vendor: ZCC.CTSolid carbide milling End mill General machining of heat-resistant alloys VSM-4E-C
● DeliverableInquiry4 variants
-
Vendor: ZCC.CTSolid carbide milling End mill General machining of heat-resistant alloys VSM-4E
● Deliverable
- From $14.34
- From $14.34
- Unit price
- per
8 variants -
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining UMC-4E-W
● DeliverableInquiry6 variants
-
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining UMC-4E
● DeliverableInquiry6 variants
-
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining UM-5EP-W
● DeliverableInquiry7 variants
-
Vendor: ZCC.CTSolid carbide milling Torus mill short cutting edge HSC/HPC machining UM-4RFP
● DeliverableInquiry12 variants
-
Vendor: ZCC.CTSolid carbide milling End mill short cutting edge HSC/HPC machining UM-4EFP
● Deliverable
- From $21.62
- From $21.62
- Unit price
- per
6 variants -
Vendor: ZCC.CTSolid carbide milling End mill reduced neck HSC/HPC machining UM-4ELP-W
● DeliverableInquiry8 variants
-
Vendor: ZCC.CTSolid carbide milling End mill long cutting edge HSC/HPC machining UM-4EL-W
● DeliverableInquiry9 variants
-
Vendor: ZCC.CTSolid carbide milling End mill long cutting edge HSC/HPC machining UM-4EL
● Deliverable
- From $21.01
- From $21.01
- Unit price
- per
9 variants -
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining UM-4E-W
● DeliverableInquiry20 variants
-
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining UM-4E
● Deliverable
- From $13.21
- From $13.21
- Unit price
- per
21 variants -
Vendor: ZCC.CTSolid carbide milling End mill long cutting edge HSC/HPC machining 5602R38414GM
● DeliverableInquiry20 variants
-
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining 5601R38414GM
● DeliverableInquiry10 variants
-
Vendor: ZCC.CTSolid carbide milling End mill long cutting edge HSC/HPC machining 5502R38414GM
● DeliverableInquiry20 variants
-
Vendor: ZCC.CTSolid carbide milling End mill HSC/HPC machining 5501R38414GM
● DeliverableInquiry10 variants
-
Vendor: ZCC.CTSolid carbide milling End mill High-performance machining of Al and Al alloys ALP-4E-W
● DeliverableInquiry10 variants
-
Vendor: ZCC.CTSolid carbide milling End mill High-performance machining of Al and Al alloys ALP-4E
● DeliverableInquiry24 variants
-
Vendor: ZCC.CTSolid carbide milling End mill High-performance machining of Al and Al alloys ALP-3E-W
● DeliverableInquiry15 variants
-
Vendor: ZCC.CTSolid carbide milling End mill High-performance machining of Al and Al alloys ALP-3E
● DeliverableInquiry42 variants
-
Vendor: ZCC.CTSolid carbide milling End mill General machining of Al and Al alloys ALG-3E-W
● DeliverableInquiry17 variants
Collections
Solid Carbide Square End Mills
High Performance Metal Working Tools
BigTools Solid Carbide Square End Mills offer precision, durability, and high MRR for
machining aluminum, titanium, stainless steel, and more.
Available in various styles with up to 8 flutes, these end mills deliver faster cutting speeds,
extended tool life, and outstanding performance in challenging environments.
machining aluminum, titanium, stainless steel, and more.
Available in various styles with up to 8 flutes, these end mills deliver faster cutting speeds,
extended tool life, and outstanding performance in challenging environments.
Our Top Sellers
- From $4.81
- From $4.81
- Unit price
- per
Product Information
▶Special flute geometry eliminates vibrations
▶Designed for mild steels, stainless steel, cast iron, tool steels, titanium alloys, prehardened steels and low hardness material
▶Excellent work piece finishes
▶Higher speeds, deeper cuts and metal removal rates
Inquiry
Product Information
▶Special chip splitter design for better chip removal shortened chip length at high axial machining
▶High Performance for Steels, Stainless Steels and Cast Iron
Inquiry
Product Information
▶Special chip splitter design for better chip removal shortened chip length at high axial machining
▶High Performance for Steels, Stainless Steels and Cast Iron
Inquiry
Product Information
▶Special chip splitter design for better chip removal shortened chip length at high axial machining
▶High Performance for Steels, Stainless Steels and Cast Iron
Inquiry
Vendor:
YG
Square GMG13 / GMG15, Corner Radius GMG17 / GMG19, Carbide, 6 Flute Multiple Length V7 PLUS A END MILLS
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Vendor:
YG
Square GMG12 / GMG14, Corner Radius GMG16 / GMG18, Carbide, 6 Flute Multiple Length V7 PLUS A END MILLS
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Vendor:
YG
SquareUGMH08, Corner Radius UGMH09, Carbide, 6 Flute Extended Reach V7 PLUS A END MILLS OD (D1)3/4～1
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Vendor:
YG
SquareUGMH08, Corner Radius UGMH09, Carbide, 6 Flute Extended Reach V7 PLUS A END MILLS OD (D1)1/4~5/8
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Vendor:
YG
SquareUGMG20, Corner Radius UGMG22, Carbide, 6 Flute Extended Reach V7 PLUS A END MILLS OD5/8~1
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Vendor:
YG
SquareUGMG20, Corner Radius UGMG22, Carbide, 6 Flute Extended Reach V7 PLUS A END MILLS OD 1/4~1/2
Product Information
▶The unique geometry of the variable pitch provides the best chatter free tool for high speed and trochoidal milling
▶Excellent performance for Stainless Steels, Mild Steels, Cast Iron, Low/Medium hardness materials under HRc40
Inquiry
Product Information
▶ Special flute geometry and multiple helix eliminate vibrations
▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40
▶ Advanced coating for superior performance and tool life
Inquiry
Vendor:
YG
Square UGMF72, Corner Radius UGMF74, Ball Nose UGMH10 Carbide, 4 Flute Extended Reach V7 PLUS A END MILLS 5/8～1
Product Information
▶ Special flute geometry and multiple helix eliminate vibrations
▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40
▶ Advanced coating for superior performance and tool life
Inquiry
Vendor:
YG
Square UGMF72, Corner Radius UGMF74, Ball Nose UGMH10 Carbide, 4 Flute Extended Reach V7 PLUS A END MILLS 1/8～1/2
Product Information
▶ Special flute geometry and multiple helix eliminate vibrations
▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40
▶ Advanced coating for superior performance and tool life
Inquiry
Vendor:
YG
Square UGMF69, Chamfer UGMF77, Corner Radius UGMF71, Ball Nose UGMG54 Carbide, 4 Flute Multiple Length V7 PLUS A END MILLS
Product Information
▶ Special flute geometry and multiple helix eliminate vibrations
▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40
▶ Advanced coating for superior performance and tool life
Inquiry
Vendor:
YG
Square UGMF68, Chamfer UGMF76, Ball Nose UGMG53 Carbide, 4 Flute Multiple Length V7 PLUS A END MILLS
Product Information
▶ Special flute geometry and multiple helix eliminate vibrations
▶ Excellent performance for stainless steels, mild steels, cast iron, low/medium hardness materials and all exotic materials up to HRc40
▶ Advanced coating for superior performance and tool life
Inquiry
Product Information
▶ New design enhances chip space in heavy cuts, while still maintaining rigidity in peel milling.
▶ Unequal index design for Chatter-Free cutting
▶ high performance milling of Stainless Steel, Titanium, and Heat-Resistant Super Alloys
Inquiry
Product Information
▶ Suitable for Titanium, Titanium Alloys, Inconel and Stainless Steels.
▶ Optimized flute design for chip evacuation and rigidity when machining difficult-to-cut materials.
▶ Special roughing profile for machining Titanium and Titanium Alloys.
▶ Longer tool life with special coating.
Inquiry
Vendor:
YG
Carbide X1-EH End Mills Plain Shank HPI88 Series 2 Flute Square for Rib Processing HPI88060~HPI88828
Product Information ▶ Improvement of tool life by applying new coating ▶ Application of tight tolerances for precision machining EDP No. Corner Radius Mill Diameter Shank Diameter Length of Cut Length Below Shank Overall Length Neck Diameter Interference Angle (°) Maximum reach lengths...
Inquiry
- Choosing a selection results in a full page refresh.