-
Vendor: TaeguTec8D-TE90-10 90° End mills with 8 cutting edges of double-sided Square inserts SQK(H)U 10 for general milling
● DeliverableInquiry5 variantsProduct List 90° Shoulder Mill with8 Cutting Edge Square Insert » Economical double-sided insert» Strong tool body and high positive insert» High productivity with maximum No. of teeth» 90° shouldering with wiper flat insert» Good chip evacuation Designation DC CICT DCONMS OAL LH APMX... -
Vendor: SOFTOOLFine-Boring Tools Jacket Collet RS1008 RS1208
● Deliverable- From $30.85
- From $30.85
- Unit price
- per
7 variantsBFD-H jacket and BFH jacket can be used interchangeably -
Vendor: TaeguTec4N TE90-06 90° End mills with unique 4 high positive helical cutting edges of double-sided 4NK(H)T 06 inserts & high ramping
● DeliverableInquiry32 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFH Series BFH-10CKB4 BFH-12CKB5 BFH-16CKB6
● Deliverable
- From $591.68
- From $591.68
- Unit price
- per
3 variantsFeature: Used with boring bar, it can be used for Ф1-ф54mm aperture machining. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: SOFTOOLFine-Boring BFI-Min Series Boring Bar CY12CR-M6-101-A CY12CR-M6-131-A
● Deliverable
- From $233.62
- From $233.62
- Unit price
- per
6 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTec4N TE90-M-06 90° Modular end mills with T-FLEXTEC adaptation & unique four high positive helical cutting edges of double-sided 4NK(H)T 06 inserts & high ramping capability
● DeliverableInquiry15 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: TaeguTec4N TE90-14 90° End mills with unique four high positive helical cutting edges of double-sided 4NKT 14 inserts and high ramping capability
● DeliverableInquiry5 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFI-Min Series Cartridge BN13 BN15
● Deliverable
- From $46.28
- From $46.28
- Unit price
- per
2 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTec4N TE90-11 90° End mills with unique four high positive helical cutting edges of double-sided 4NKT 11 inserts & high ramping capability
● DeliverableInquiry5 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFI-Min Series Adaptor BS13-15 BS15-18 BS18-22
● Deliverable
- From $407.57
- From $407.57
- Unit price
- per
3 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTec4N TE90-09 90° End mills with unique four high positive helical cutting edges of double-sided 4NK(H)T 09 inserts and high ramping capability
● DeliverableInquiry16 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFI-Min Series CY12CR-BS13-90 CY12CR-BS13-120
● Deliverable
- From $687.47
- From $687.47
- Unit price
- per
6 variants -
Vendor: SOFTOOLFine-Boring BFI Series Extended Washer Assembly BPFI-WS-025A BPFI-WS-035A
● Deliverable
- From $36.90
- From $36.90
- Unit price
- per
6 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTec4N TE90-M-09 90° Modular end mills with T-FLEXTEC adaptation & unique four high positive helical cutting edges of double-sided 4NK(H)T 09 inserts & high ramping capability
● DeliverableInquiry4 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFI Series Cartridge BPFI-CA-0511TB06-S BPFI-CA-0511TC06-S
● Deliverable
- From $56.57
- From $56.57
- Unit price
- per
17 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTec4N TE90-S-06 90° Modular end mills with MAXIRUSH adaptation & unique four high positive helical cutting edges of double-sided 4NKT 06 inserts and high ramping capability
● DeliverableInquiry1 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: TaeguTec4N TE90-M-11 90° Modular end mills with T-FLEXTEC adaptation & unique four high positive helical cutting edges of double-sided 4NKT 11 inserts & high ramping capability
● DeliverableInquiry3 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFI Series Adaptor BPFI-CKB1-020035 BPFI-CKB2-025046
● Deliverable
- From $474.43
- From $474.43
- Unit price
- per
8 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTec4N TE90-M-14 90° Modular end mills with T-FLEXTEC adaptation & unique four high positive helical cutting edges of double-sided 4NKT 14 inserts & high ramping capability
● DeliverableInquiry2 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: TaeguTec4N TE90-M-04 90° Modular end mills with T-FLEXTEC adaptation & unique four high positive helical cutting edges of double-sided 4NKT 04 inserts & high ramping capability
● DeliverableInquiry8 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: TaeguTec4N TE90-S-04 90° Modular end mills with MAXIRUSH adaptation & unique four high positive helical cutting edges of double-sided 4NKT 04 inserts and high ramping capability
● DeliverableInquiry3 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: TaeguTec4N TE90-04 90° End mills with unique four high positive helical cutting edges of double-sided 4NKT 04 inserts and high ramping capability
● DeliverableInquiry18 variantsProduct List 90° Shoulder Mill 4 Cutting Edge Insert withHigh Ramping Capability » High productivity with high step milling and high ramping down angle» Double-sided 4 corner insert» Various insert options and cutter range» Very stable machining with strong insert and unique packet design»...
-
Vendor: SOFTOOLFine-Boring BFI Series BFI-070100-TC1102-S-CKB6 BFI-070100-TC1103-S-CKB6
● Deliverable
- From $745.97
- From $745.97
- Unit price
- per
6 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: SOFTOOLFine-Boring BFI Series BFI-032042-TP08-S-CKB3 BFI-032042-TC09-S-CKB3
● Deliverable
- From $578.18
- From $578.18
- Unit price
- per
9 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. 产品 -
Vendor: TaeguTecTE90AN-M-11 90° Modular end mills with T-FLEXTEC adaptation & four helical cutting edges of double-sided inserts AN 11
● DeliverableInquiry3 variantsProduct List Double Sided Negative Inserts with Long Type High Helix 4 Cutting Edgefor 90° Shoulder Milling » Economical double-sided 4 cutting edge insert for shoulder milling» Soft machining due to extra positive axial and radial cutting edge» High depth of cut with long...
-
Vendor: SOFTOOLFine-Boring BFI Series BFI-020025-TB06-S-CKB1 BFI-020025-TC06-S-CKB1
● Deliverable
- From $525.34
- From $525.34
- Unit price
- per
21 variantsFeature: Apply to Ф20-Ф160mm aperture finishing. Machining aperture tolerance can reach IT6. Diameter adjustment accuracy: 0.001mm. -
Vendor: TaeguTecTE90AN-11 90° End mills with four helical cutting edges of double-sided inserts AN 11
● DeliverableInquiry11 variantsProduct List Double Sided Negative Inserts with Long Type High Helix 4 Cutting Edgefor 90° Shoulder Milling » Economical double-sided 4 cutting edge insert for shoulder milling» Soft machining due to extra positive axial and radial cutting edge» High depth of cut with long...
-
Vendor: TaeguTecTE90AN-16 90° End mills with four helical cutting edges of double-sided inserts AN 16
● DeliverableInquiry8 variantsProduct List Double Sided Negative Inserts with Long Type High Helix 4 Cutting Edgefor 90° Shoulder Milling » Economical double-sided 4 cutting edge insert for shoulder milling» Soft machining due to extra positive axial and radial cutting edge» High depth of cut with long...
-
Vendor: TaeguTecTE90AN-M-16 90° Modular end mills with T-FLEXTEC adaptation & four helical cutting edges of double-sided inserts AN 16
● DeliverableInquiry2 variantsProduct List 90° Shoulder Milling Line with Long Type High Helix Cutting Edge Inserts » Single sided 2 cutting edge insert for real 90° shoulder milling» Soft machining with high positive axial and radial cutting edge» Long cutting edge suitable for high depth of...
-
Vendor: TaeguTecTE90AP-M-17 90° Modular end mills with T-FLEXTEC adaptation & high positive two helical cutting edges of AP.. 17 inserts
● DeliverableInquiry6 variantsProduct List 90° Shoulder Milling Line with Long Type High Helix Cutting Edge Inserts » Single sided 2 cutting edge insert for real 90° shoulder milling» Soft machining with high positive axial and radial cutting edge» Long cutting edge suitable for high depth of...
Collections
All Indexable Tools
Indexable Cutting Tools - Indexable Inserts
Discover high-performance indexable cutting tools with replaceable inserts for precise,
cost-effective metalworking. Perfect for milling, turning, and drilling across materials like steel,
aluminum, and titanium. Durable and efficient for CNC and manual machining in automotive,
aerospace, and manufacturing industries.
cost-effective metalworking. Perfect for milling, turning, and drilling across materials like steel,
aluminum, and titanium. Durable and efficient for CNC and manual machining in automotive,
aerospace, and manufacturing industries.
Our Top Sellers
Vendor:
YG
8% COBALT (M42) Flat Shank E2193 & E2125 Series, HSS Co8, Multi Flute Regular & Long Length Coarse Pitch Roughing Ball Nose COBALT & HSS End Mills 1/4~1
Product Information
▶ This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2015 & HSS (M2) Plain Shank E1015 Series, HSS Co8 & HSS, 2 Flute Miniature Long Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2013 & HSS (M2) Plain Shank E1013 Series, HSS Co8 & HSS, 2 Flute Miniature Regular Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Plain Shank E2008 & HSS (M2) Plain Shank E1008 Series, HSS Co8 & HSS, 2 Flute Miniature Stub Length Ball Nose Double COBALT & HSS End Mills 1/16~3/16
Product Information
▶ Helical flute in the nose radius. Suitable for high efficient copying process and cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2069 Series, HSS Co8, 4 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
Product Information
▶ Same construction features as E2020 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2021 Series, HSS Co8, 4 Flute Long Length Ball Nose COBALT & HSS End Mills 1/4～1
Product Information
▶ Longer flute length than E2020 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2020 Series, HSS Co8, 4 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
Product Information
▶ The four flute ball end mills are designed for milling of radius bottom slots fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2112 & HSS (M2) Flat Shank E1112 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose Double COBALT & HSS End Mills 1/8～1
Product Information
▶ Same construction features as E2110 end mill in a more economical version. Removes more material per grind. Machine ground notch assures positive anchorage in tool holder.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2111 & HSS (M2) Flat Shank E1111 Series, HSS Co8 & HSS, 2 Flute Extended Length Ball Nose COBALT & HSS End Mills 1/8～1
Product Information
▶ Longer flute length than E2110 type and suitable for high efficient copying process and deep cutting of die mold corner radius.
Inquiry
Vendor:
YG
8% COBALT (M42) Flat Shank E2110 & HSS (M2) Flat Shank E1110 Series, HSS Co8 & HSS, 2 Flute Regular Length Ball Nose COBALT & HSS End Mills 1/8～2
Product Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two...
Inquiry
Vendor:
YG
Flat Shank E9992 Series, Premium HSS-PM, 2 Flute Regular Length Ball Nose TANK-POWER End Mills 1/8～1
Product Information ▶ The two flute ball end mills are designed for milling of radius bottom slots, fillets and special contours. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute...
Inquiry
Product Information
Inquiry
Product Information
▶ Designed for milling die cavity.
▶ Many different center line angles are available on your job requirement.
Inquiry
Vendor:
YG
Plain Shank E5251 & E5252 Series, Carbide, 2&4 Flute Stub Length Double Ball Nose CARBIDE End Mills 7/32～1/2
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5062 Series, Carbide, 4 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5018 Series, Carbide, 2 Flute Extra Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5014 & E5060 Series, Carbide, 2&4 Flute Long Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5250 Series, Carbide, 4 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank E5249 Series, Carbide, 2 Flute Regular Length Ball Nose CARBIDE End Mills 1/8～1
Product Information
▶ Suitable for cutting hardened & high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, aluminum with a high percentage of silicon and abrasive plastics.
Inquiry
Vendor:
YG
Plain Shank EI450 Series, Carbide, 2 Flute Long Reach Ball Nose D-POWER GRAPHITE End Mills 2～8
Product Information ▶ Higher hardness of film and excellent wear-resistance increase the tool life dramatically. ▶ Ultra fine film of YG-1’s diamond coated carbide end mills ensure the smooth and excellent surface on work materials. ▶ High performance on graphite, wrought aluminum, bakelite, plastics,...
Inquiry
- Choosing a selection results in a full page refresh.