-
Vendor: SOFTOOLHSK100A-C Force Milling Chuck HSK100A-C20-100 HSK100A-C20-130
● DeliverableInquiry9 variantsFeatures: Slitting. In that case end mill shank or collet have oil or chips, divide the slitting into six in order to prevent slipping and to grip exactly. Needle bearing. It adopts two line arrangement in order to minimize rolling friction and to slip... -
Vendor: SOFTOOLHSK63A-C Force Milling Chuck HSK63A-C20-100 HSK63A-C25-100
● DeliverableInquiry6 variantsFeatures: Slitting. In that case end mill shank or collet have oil or chips, divide the slitting into six in order to prevent slipping and to grip exactly. Needle bearing. It adopts two line arrangement in order to minimize rolling friction and to slip...
-
Vendor: SOFTOOLHigh-Precision ER Collet ER8 ER11 ER16 ER20 ER25 ER32 ER40
● DeliverableInquiry97 variantsFeatures: Material: SUJ2(High-carbon bearing steel: After heat treatment, it has hardness and toughness, better grinding quality, good flexibility, and longer using life span). HRC: HRC44-48. Surface roughness: within RZ2.5. Chucking range: ER8=0.5mm; ER11/16/20/25/32/40=1mm. But if the internal hole is less than 2.5mm, the chucking...
-
Vendor: SOFTOOLHSK100A-SLN Side Lock End Mill Holder HSK100A-SLN16-100 HSK100A-SLN16-160
● DeliverableInquiry18 variantsFeatures: Internal hole tolerance: H5
-
Vendor: SOFTOOLHSK63A-SLN Side Lock End Mill Holder HSK63A-SLN8-100 HSK63A-SLN10-100
● DeliverableInquiry22 variantsFeatures: Internal hole tolerance: H5
-
Vendor: SOFTOOLHSK100A-ER Collet Chuck HSK100A-ER16-100 HSK100A-ER16-125
● DeliverableInquiry35 variantsFeatures: Nut for pre-set dynamic balance nut. The whole through hole is favorable for water and shock resistance. When installed, the collet must be loaded into the nut, and then into the tool, and then into the body and lock. The tool into the...
-
Vendor: SOFTOOLHSK63A-ER Collet Chuck HSK63A-ER16-075 HSK63A-ER16-100
● DeliverableInquiry30 variantsFeatures: Nut for pre-set dynamic balance nut. The whole through hole is favorable for water and shock resistance. When installed, the collet must be loaded into the nut, and then into the tool, and then into the body and lock. The tool into the...
-
-
Vendor: SOFTOOLLocking Screw - Apply Pressure To The Plunger; Fixed Torque For Reasonable Pressure
● DeliverableInquiry4 variants
-
Vendor: SOFTOOLBack Up Screw - Length--Adjusting Screw With Through Hole
● DeliverableInquiry8 variants
-
-
Vendor: SOFTOOLNozzle - Provide Optimal Internal Coolant Supply for Hsk Chucks
● DeliverableInquiry7 variants
-
Vendor: SOFTOOLSK with Type PSC Adaptor SK40 SK50
● Deliverable
- From $258.00
- From $258.00
- Unit price
- per
18 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLPSC with Type ER PSC32 PSC40 PSC50 PSC63 PSC80
● Deliverable
- From $272.46
- From $272.46
- Unit price
- per
20 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLPSC Side Lock End Mill Holder-Axial PSC32 PSC40 PSC50 PSC63 PSC80
● Deliverable
- From $249.32
- From $249.32
- Unit price
- per
28 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLPSC Side Lock End Mill Holder PSC32 PSC40 PSC50 PSC63 PSC80
● Deliverable
- From $249.32
- From $249.32
- Unit price
- per
42 variantsFeature: Stronger transmission torque and stability with PSC interface. Modular structure of holder. More easy to maintain. Prolong the service life. Provide quick-change function. -
Vendor: SOFTOOLHydraulic Actuated Receiver-Low-Pressure Cooling PSC63 PSC80
● DeliverableInquiry2 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely.
-
Vendor: SOFTOOLPSC Square Shank Internal Receiver PSC40/50/63
● Deliverable
- From $798.75
- From $798.75
- Unit price
- per
6 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely. -
Vendor: SOFTOOLPSC VDI Machine Tool Interface Center Pull Stud Clamping PSC32/40/50/63/80
● Deliverable
- From $417.00
- From $417.00
- Unit price
- per
14 variantsFeature: Used with tools of PSC interface. Reailize the exchange of left and right hand tools. Cam locking device, make changing the tool timely. -
Vendor: SOFTOOLGeneral Purpose 45° Adaptor PSC50-ASHR45-085-20 PSC50-ASHL45-085-20
● Deliverable
- From $429.00
- From $429.00
- Unit price
- per
6 variantsFeature: Can be used with traditional square tool holders. Reduce the tool cost. No need downtime to adjust the tool. Can be applied from multiple angles. -
Vendor: SOFTOOLPSC-SR Adapter Handle-R/LX 45° PSC50-SR25-RX-045 PSC50-SR25-LX-045
● Deliverable
- From $341.89
- From $341.89
- Unit price
- per
12 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Adapter Handle-R/L 0° PSC50-SR32-42-RG PSC50-SR32-42-LG
● Deliverable
- From $341.89
- From $341.89
- Unit price
- per
14 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Adapter Handle 0° PSC32-SR32-22-NG PSC40-SR32-32-NG
● Deliverable
- From $308.57
- From $308.57
- Unit price
- per
5 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Adapter Handle-F 90° PSC32-SR25-33-RF PSC32-SR25-33-LF
● Deliverable
- From $308.57
- From $308.57
- Unit price
- per
24 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Face Slotting Adapter-F 90° PSC40-SR32-60-RF PSC40-SR32-60-LF
● Deliverable
- From $311.46
- From $311.46
- Unit price
- per
12 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Adapter Handle-R/LX-T 45° PSC40-SR32-RX-045-T PSC40-SR32-LX-045-T
● Deliverable
- $307.61
- $307.61
- Unit price
- per
2 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR Adapter Handle-R/LX-L1 45° PSC50-SR32-RX-045-L1 PSC63-SR32-RX-045-L1
● Deliverable
- From $393.00
- From $393.00
- Unit price
- per
5 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR70 Adapter Handle-R/LF 90° PSC50-SR70-RF-043 PSC50-SR70-LF-043
● Deliverable
- From $410.36
- From $410.36
- Unit price
- per
8 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR70 Adapter Handle-R/LG 0° PSC50-SR70-RG-050 PSC50-SR70-LG-050
● Deliverable
- From $410.36
- From $410.36
- Unit price
- per
8 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a... -
Vendor: SOFTOOLPSC-SR70 Adapter Handle-R/LX 45° PSC50-SR70-RX-045-050 PSC50-SR70-LX-045-050
● Deliverable
- From $574.29
- From $574.29
- Unit price
- per
10 variantsFeature: The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools,providing extremely high flexibility in tooling. High stability and strength,compatible with a...
Collections
Our Top Sellers
Mounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
Inquiry
Vendor:
SOFTOOL
Japanese Standard Pull Stud MAS 403-1975 (Coolant) BT30-45° W BT40-45° W BT50-45° W BT60-45° W BT30-60° W BT40-60° W BT50-60° W BT60-30° W BT30-90° W BT40-90° W BT50-90° W BT60-90° W
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
Inquiry
Features： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
Inquiry
Features： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
Inquiry
Features： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
Inquiry
Features：
Outer diameter size according to DIN6499-B
Material: SUJ2
Hardness: 44-48HRC
When ordering please specify the collet type, and the size of d2. d1. W.
Inquiry
Features： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively...
Inquiry
Vendor:
SOFTOOL
Overload Prote Ction Tap Collet-GT42 System (ISO/INCH/JIS) ISO-GT42-M24 ISO-GT42-M27
Features： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
Inquiry
New Products
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $356.44
- From $356.44
- Unit price
- per
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $606.26
- From $606.26
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $530.11
- From $530.11
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $441.49
- From $441.49
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $287.51
- From $287.51
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $284.84
- From $284.84
- Unit price
- per
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
- Choosing a selection results in a full page refresh.