-
-
Vendor: BIGtoolsBT-D62 Universal Floating Deburring Reamer Holder - Straight Shank
● Deliverable- From $1,160.71
- From $1,160.71
- Unit price
- per
4 variants -
Vendor: BIGtoolsD62 Universal Floating Deburring Reamer Holder - Straight Shank
● DeliverableInquiry2 variants
-
Anti-iron chips and coolant, making the internal mechanism free from pollution. The surface of the chuck body and internal parts are quenched and long-term lubrication is used to ensure high precision and long service life. Centrifugal force compensation. Suitable for high-low pressure clamping.
-
Vendor: BIGtoolsBT-D39 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- $535.71
- $535.71
- Unit price
- per
2 variants -
Vendor: BIGtoolsBT-D58 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- $535.71
- $535.71
- Unit price
- per
2 variants -
Vendor: BIGtoolsD39 Radial Floating Reamer Holder (with internal cooling) - Straight Shank
● Deliverable
- $614.29
- $614.29
- Unit price
- per
8 variants -
Vendor: BIGtoolsD66 Radial Floating Reamer Holder - Straight Shank / Side Clamp
● DeliverableInquiry10 variants
-
Vendor: BIGtoolsSWT Self-Centering Compensation Pull Back 2 Jaw Chuck
● DeliverableInquiry3 variants
-
Vendor: BIGtoolsBT-D66 Radial Floating Reamer Holder - Straight Shank
● DeliverableInquiry2 variants
-
Vendor: BIGtoolsSW Self-Centering Compensation Pull Back 3 Jaw Chuck
● DeliverableInquiry8 variantsAnti-iron chips and coolant, making the internal mechanism free from pollution. The surface of the chuck body and internal parts are quenched and long-term lubrication is used to ensure high precision and long service life. Centrifugal force compensation. Suitable for high-low pressure clamping.
-
Vendor: BIGtoolsD69 Radial Floating Reamer Holder (with internal cooling) - Straight Shank
● Deliverable
- $583.33
- $583.33
- Unit price
- per
1 variants -
The chuck has a through hole in the center, and its performance is similar to that of the KW chuck.
-
Vendor: BIGtoolsBT-D69 Radial Floating Reamer Holder (with internal cooling) - Straight Shank
● DeliverableInquiry2 variants
-
Vendor: BIGtoolsD25 Radial Floating Reamer Holder (with internal cooling) - Straight Shank
● Deliverable
- $559.52
- $559.52
- Unit price
- per
3 variants -
The connection method of KWT strong floating chuck is the same as that of KW.
-
Vendor: BIGtoolsD58 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- From $571.43
- From $571.43
- Unit price
- per
6 variants -
Strong floating 2-jaw and 3-jaw chucks are very suitable for casting and forging automatic centering or automatic compensation turning processes. Their functions and features are: The workpiece is clamped and pulled back, and can clamp a 10° dimension. The jaws are free to swing...
-
NHRF chuck has dual sensing signal device. NHRF chuck can be divided into 8x45° 4x90°. NHRF chuck can replace the jaws and the connection method is as convenient as NHR.
-
Vendor: BIGtoolsD19 Radial Floating Reamer Holder - Straight Shank
● DeliverableInquiry5 variants
-
Vendor: BIGtoolsD22 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- $516.67
- $516.67
- Unit price
- per
6 variants -
NHRL chuck can be indexed 2×180°. After the part is clamped once, two surfaces can be processed. NHRL chuck can be easily replaced and connected as NHR.
-
The NHRD chuck has expanded the center positioning function based on the NHR chuck to ensure the position accuracy of the workpiece during drilling. The NHRD chuck indexing is 8×45°, 4×90°. The NHRD chuck has the same convenient jaw replacement and connection method as...
-
Vendor: BIGtoolsD39 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- $516.67
- $516.67
- Unit price
- per
6 variants -
NHRP chuck is suitable for processing flat parts and long-axis workpieces. NHRP chuck is equipped with a strong or weak adjustment switch, which can adjust the clamping force according to needs. NHRP chuck has the same convenient jaw replacement and connection method as NHR....
-
Vendor: BIGtoolsD58 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- From $527.72
- From $527.72
- Unit price
- per
21 variants -
Vendor: BIGtoolsNHRS 90° Additional Angle Type Auto Indexing Chuck
● DeliverableInquiry1 variantsNHRS chuck can be divided into 4x90° and additional divisions of 3°, 4°, 5° are also available. After the parts are installed at one time, more than 4 surfaces can be processed. NHRS chuck has the same convenient jaw replacement and connection method as...
-
Vendor: BIGtoolsD66 Radial Floating Reamer Holder - Straight Shank
● Deliverable
- $619.05
- $619.05
- Unit price
- per
3 variantsNumber Model L D2 D d Applicable to ER collet Circumferential floating amount (mm) 22016601 C20-FDER32-75-D66 75 20 66 ER32 1.6 22016602 C25-FDER32-75-D66 75 25 66 ER32 1.6 22016603 C32-FDER32-75-D66 75 32 66 ER32 1.6 The "radial floating reamer handle" can realize automatic... -
NHRR chuck is based on NHR chuck, with new design and improvement. NHRR chuck solves the problem of center clamping of some parts (precision castings, pipe joints, etc.) due to certain precision requirements on the machined or unmachined surfaces. NHRR chuck has the same...
-
Multiple stations can be processed in one clamping. High-precision and high-quality pr oducts can be obtained, Automatic indexing can be performed when the spindle rotates, and 8X45°, 4X90° or 2X180° indexing can be performed. It provides convenience for the processing of cross shafts, valve...
Collections
Our Top Sellers
Mounting Instructio for ER Collets and Nuts: Put the collet into the nut, turn the collet slightly. Push it into the nut at the offered direction evenly when the offset flange sinks into the undercut of the collet. Fix the nut and the collet on the...
Inquiry
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35$5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35+5HRC, (Protect...
Inquiry
Vendor:
SOFTOOL
Japanese Standard Pull Stud MAS 403-1975 (Coolant) BT30-45° W BT40-45° W BT50-45° W BT60-45° W BT30-60° W BT40-60° W BT50-60° W BT60-30° W BT30-90° W BT40-90° W BT50-90° W BT60-90° W
Features: General level Pull stud Material: 40Cr. Head hardness: 46-50HRC. Thread hardness is a little low; 35#5HRC, (Protect shank thread, core hardness can resist hit). Accuracy: 0.02. High-precision Hard Pull stud Material: 20CrMnTi. Head hardness: 55-58HRC. Thread hardness is a little low; 35$5HRC, (Protect shank...
Inquiry
Features： Material: SUJ-2. Hardness: HRC44-48. Precision: ≤ 0.01 mm. Definition clamp and aperture same shank of tool diameter. The collet does not have the elastic contraction scope, the emphasis chucking power. In the cutting tool posts the collet to surpass the hole effective clamp...
Inquiry
Features： Material: SUJ2 HRC: HRC44-48 Inner hole grinding for many times, so as to reach Ra0.4, has a mirror effectThe design of the convex platform in front of the collet can prevent dust and chip getting into the collet when processing, prolong the tool's life....
Inquiry
Features： Material: SUJ2. Hardness: HRC44-48. Differences in the use of grooves to reach around the sealing. Central water feature only applies to folders to hold the water hole tool. Canwithstand water pressure 7Mpa. Non-standard holes can be customized. Take use of the difference of...
Inquiry
Features：
Outer diameter size according to DIN6499-B
Material: SUJ2
Hardness: 44-48HRC
When ordering please specify the collet type, and the size of d2. d1. W.
Inquiry
Features： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively...
Inquiry
Vendor:
SOFTOOL
Overload Prote Ction Tap Collet-GT42 System (ISO/INCH/JIS) ISO-GT42-M24 ISO-GT42-M27
Features： High precision, long tool-life with torque protection function. Torsion reflect sensitive and changes according to various material to set up corresponding torque. Used for kinds of tapping machine including electric tapping machine and pneumatic tapping machine. At present, many tapping machine factories have...
Inquiry
New Products
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $356.44
- From $356.44
- Unit price
- per
Features：
Can be used with traditional square tool holders.
Reduce the tool cost.
No need downtime to adjust the tool.
Can be applied from multiple angles.
- From $606.26
- From $606.26
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.99
- From $315.99
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $530.11
- From $530.11
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $378.79
- From $378.79
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $441.49
- From $441.49
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $315.59
- From $315.59
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $287.51
- From $287.51
- Unit price
- per
Features： The modular tool holder design facilitates faster and easier tool changes, significantly reducing the time required for tool clamping and changeover. Reduced inventory of tool bodies and demand for non-standard cutting tools, providing extremely high flexibility in tooling. High stability and strength, compatible...
- From $284.84
- From $284.84
- Unit price
- per
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
Features：
Material: Aluminum + hardened stainless steel.
Manual clamping and unlocking, simple operation, no need for additional power source.
Surface hardening treatment, high wear resistance.
Inquiry
- Choosing a selection results in a full page refresh.