-
-
-
Vendor: BIGtoolsRigid PCD Small Bore Boring Tool for Internal Machining
● Deliverable- $12.50
- $12.50
- Unit price
- per
17 variantsProduct List Model Diameter Length R Inner Hole Angle D4*100*R0.2 (Forward) 4 100 0.2 60 D5*100*R0.2 (Forward) 5 100 0.2 60 D6*100*R0.2 (Forward) 6 100 0.2 60 D8*100*R0.2 (Forward) 8 100 0.2 60 D10*100*R0.2 (Forward) 10 100 0.2 60 D12*100*R0.2 (Forward) 12 100 0.2 60 D12*150*R0.2 (Forward) 12 150 0.2 60... -
Vendor: SOFTOOLRigid Tension and Compression Taper Holder/TER-B BT30-TER20-B-100 BT30-TER32-B-100
● DeliverableInquiry2 variantsFeatures： Spindle Conicity Standard: JIS MAS 403 BT. Rigid function ensures machining center spindle rotate in synchronized precise, While MTB holder in use. Can be replaced by ER collet for gripping cutting tool, Drill bit, and draw bolt and so on. Don't lock excessively... -
Features & Benefits The Mitutoyo riser blocks are constructed with the same exacting standards as our height masters. Available in three different height extensions in metric or inch units, these riser blocks extend the height calibration ranges of Mitutoyo height master units. Specially designed...
-
Vendor: ZCC.CTRN** Holder (External) C-Clamping CRDNN2020K12 2525M12 3225P12/15 4040R15
● DeliverableInquiry5 variants -
Vendor: ZCC.CTRN** Holder (External) M-Clamping 2020K12 2525M12 3225P12 3232P12
● Deliverable
- From $19.72
- From $19.72
- Unit price
- per
8 variants -
Vendor: ZCC.CTRN** Holder (External) M-Clamping MRDNN2020K12 2525M12 3225P12 32P12
● Deliverable
- From $21.35
- From $21.35
- Unit price
- per
4 variants -
Vendor: TaeguTecRNGN 1207 FL Flat type negative round ceramic inserts for high speed milling of super alloys
● DeliverableInquiry6 variantsProduct List High-speed milling of super alloys » Round type SiAlON ceramic grade inserts» High-speed milling on super alloys» Special wedge clamp with air supply nozzle» Strong clamping and stable machining» Higher productivity with more teeth Designation RE IC S APMX ap (min) ap... -
Vendor: TaeguTecRNMU 10/12/16 S-M Double-sided economical round inserts with serrated cutting edges for smooth machining & 4 index per side -total maximum 8 corners
● DeliverableInquiry13 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation RE IC...
-
Vendor: TaeguTecRNMU 10/12/16-ML Double-sided economical round inserts for general milling applications with max. 8 index per side (total 16 corners) when the depth of cut is limited.
● DeliverableInquiry16 variantsProduct List Double-sided Round Inserts for Profiling andMultiple Applications » Economical double-sided round type insert» Full radius insert "-ML" and serrated cutting edge insert "S-M"» Anti-rotational design enables secure clamping and easy indexing» Various applications for profiling, shouldering, facing and slotting Designation RE IC...
-
Vendor: BIGtoolsRough Boring Back Boring Tool Apron G-GBR-DZFR1D030-035-CC0690 G-GBR-DZFR2D033-041-CC0690
● DeliverableInquiry16 variants
-
Vendor: BIGtoolsRough boring head (large aperture) processing range φ150-φ530 steel bridge/ aluminum bridge
● DeliverableInquiry14 variantsNo inserts attached,please purchase according to your needs No rivets attached. Please note it, different machines use different type rivets If you need, extended bridge type shank (Non-standard) is available. The tip and direction of otation ofthe standard product are in the same phase... -
Vendor: BIGtoolsRough boring head (large aperture)revers borin Processing range φD 165~505
● DeliverableInquiry5 variants
-
Vendor: BIGtoolsRough boring head(reverse boring) processing range φ25-φ 153
● DeliverableInquiry7 variantsNo inserts atached,please purchase according to your needs Attached with screw and wrench
-
Vendor: BIGtoolsRough Boring Inserts G-CCMT060202-MM G-CCMT060204-MM
● Deliverable
- From $1.98
- From $1.98
- Unit price
- per
36 variants -
Vendor: BIGtoolsRough Boring Inserts Tip Seat G-GBR-DZR1D020-024-CC0690 G-GBR-DZR1D023-027-CC0690
● DeliverableInquiry39 variants
-
Vendor: BIGtoolsRough Boring Tool Bit G-GBR- RBC19L22R1 G-GBR- RBC25L25R2
● DeliverableInquiry11 variants
-
Vendor: SOFTOOLRough-Boring BRA Series Adaptor BPRA-CKB2-025024 BPRA-A32A-130056
● Deliverable
- From $80.68
- From $80.68
- Unit price
- per
8 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRA-CC Series BRA-025035-CC06-S-CKB2 BRA-130160-CC12-S-A32A
● Deliverable
- From $195.86
- From $195.86
- Unit price
- per
8 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRA-CC Series Sliding Cartridge BPRA-SL-CC06-S-OA BPRA-SL-CC12-S-VB
● Deliverable
- From $57.64
- From $57.64
- Unit price
- per
16 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRA-SC Series BRA-035045-SC09-S-CKB3 BRA-130160-SC12-S-A32A
● Deliverable
- From $217.93
- From $217.93
- Unit price
- per
7 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRA-SC Series Sliding Cartridge BPRA-SL-SC09-S-PA BPRA-SL-SC12-S-VB
● Deliverable
- From $64.50
- From $64.50
- Unit price
- per
14 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRA-TC Series BRA-035045-TC11-S-CKB3 BRA-130160-TC16-S-A32A
● Deliverable
- From $217.93
- From $217.93
- Unit price
- per
7 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRA-TC Series Sliding Cartridge BPRA-SL-TC11-S-PA BPRA-SL-TC16-S-VB
● Deliverable
- From $64.50
- From $64.50
- Unit price
- per
14 variantsFeature: Apply to Ф25-Ф160mm aperture machining. Machining aperture tolerance ±0.05mm. Alloy steel tool body with special surface treatment improves the rigidity and wear resistance. The sliding cartridge equipped with ISO inserts is with good market versidity. -
Vendor: SOFTOOLRough-Boring BRB-CC-S Series BRB-160215-CC12-S-A40C BRB-215270-CC12-S-A40C
● Deliverable
- From $780.00
- From $780.00
- Unit price
- per
2 variantsFeature: Apply to Ф160-Ф510mm aperture machining. Machining hole diameter tolerance ±0.05. Aviation aluminum bridge with less weight can reduce the spindle load. The cartridge equipped with ISO inserts is with good market versidity. Bidirectional adjustment in axial and radial is available. -
Vendor: SOFTOOLRough-Boring BRB-CC-S Series BRB-270350-CC12-S-A60C BRB-430510-CC12-S-A60C
● Deliverable
- From $1,001.89
- From $1,001.89
- Unit price
- per
3 variantsFeature: Apply to Ф160-Ф510mm aperture machining. Machining hole diameter tolerance ±0.05. Aviation aluminum bridge with less weight can reduce the spindle load. The cartridge equipped with ISO inserts is with good market versidity. Bidirectional adjustment in axial and radial is available. -
Vendor: SOFTOOLRough-Boring BRB-CC-S Series cartridge BPRB-CA-CC12-S
● Deliverable
- $92.57
- $92.57
- Unit price
- per
1 variantsFeature: Apply to Ф160-Ф510mm aperture machining. Machining hole diameter tolerance ±0.05. Aviation aluminum bridge with less weight can reduce the spindle load. The cartridge equipped with ISO inserts is with good market versidity. Bidirectional adjustment in axial and radial is available. -
Vendor: SOFTOOLRough-Boring BRB-CN-D Series BRB-160215-CN12-D-A40C BRB-215270-CN19-D-A40C
● Deliverable
- From $788.25
- From $788.25
- Unit price
- per
6 variantsFeature: Apply to Ф160-Ф510mm aperture machining. Machining hole diameter tolerance ±0.05. Aviation aluminum bridge with less weight can reduce the spindle load. The cartridge equipped with ISO inserts is with good market versidity. Bidirectional adjustment in axial and radial is available. -
Vendor: SOFTOOLRough-Boring BRB-CN-D Series BRB-270350-CN12-D-A60C BRB-430510-CN19-D-A60C
● Deliverable
- From $1,010.14
- From $1,010.14
- Unit price
- per
9 variantsFeature: Apply to Ф160-Ф510mm aperture machining. Machining hole diameter tolerance ±0.05. Aviation aluminum bridge with less weight can reduce the spindle load. The cartridge equipped with ISO inserts is with good market versidity. Bidirectional adjustment in axial and radial is available.
Related categories
3 Flute Carbide Drills
BIG DAISHOWA
Carbide Drill Bits
Coolant
Damping Tools
Deburring Tools
Digimatic
End Mills for High Temp Alloys
End Mills for High-Hardness Materials
Endmills for Stainless Steels
External Coolant
Extrnal
Finishing End Mills
For Copper and Aluminum Alloys
High Efficiency Machining
High Performance Endmill for Composite
High Speed Machining of Graphite
High-Feed Carbide End Mills
HSS Roughers
Insert
Internal
Internal Coolant
ISCAR
Large Diameter Boring
Mega Chuck
Micro Deep End Mills
Modular Drill
PB Swiss Tools
PCD Drill
PCD End Mills
Rough Boring
Roughing End Mills
Ruby
Shallow Hole Drill
Small Parts Machining
Solid End Mills for Dental
Swiss Type Lathe
TaeguTec
Tungsten carbide
Without Coolant
ZCCT